M

Mini-Circuits

Designs, manufactures, and distributes RF/microwave components

Environmental Health & Safety Manager

Full-Time
$150k - $175k/yr
Expert
Bachelor's
Hialeah, FL, USA+1 moreMore locations: Deer Park, NY, USA
RemoteOccasional travel, including some overnight travel, is required.
Facilities OperationsEnvironmental Health & Safety

About the job

Requirements
  • A bachelor's degree in environmental health and safety or a related discipline, such as Environmental Science or Occupational Safety, is required.
  • At least 10 years of progressive environmental health and safety experience, including leadership responsibility.
  • Experience in a manufacturing environment is required.
  • Experience leading multi-site environmental health and safety programs and teams.
  • Experience providing leadership oversight for emergency preparedness and risk management is required.
  • Strong knowledge of Occupational Safety and Health Administration, Environmental Protection Agency, Department of Transportation, and other applicable federal, state, and local environmental health and safety regulations.
  • Experience supporting executive-level management.
  • Experience coaching leaders and employees at all levels of the organization.
  • Experience leading projects, process improvements, and cross-functional initiatives.
  • Strong written, verbal, and presentation skills.
  • Demonstrated ability to influence senior leaders and drive organizational change.
  • Ability to manage ambiguity and competing priorities.
  • Strong analytical, problem-solving, and decision-making capabilities.
  • Strong attention to detail and commitment to operational excellence.
  • Ability to manage conflict and build collaborative relationships.
  • Proven ability to deliver positive outcomes for employees, leadership, and the business.
  • Ability and willingness to comply with the company's Code of Conduct.
  • A valid driver's license and ability to drive for extended periods of time.
Responsibilities
  • Develop and execute the company's environmental health and safety strategy, objectives, and performance metrics across all North American facilities.
  • Lead the cross-site environmental health and safety function, aligning programs, priorities, resources, and performance objectives across all locations.
  • Develop, manage, and administer departmental operating and capital budgets.
  • Establish and monitor leading and lagging environmental health and safety performance indicators and provide regular reporting, analysis, and recommendations to senior leadership.
  • Drive a proactive safety culture through leadership engagement, risk assessments, incident prevention initiatives, and continuous improvement programs.
  • Partner with Operations, Engineering, Facilities, Quality, Human Resources, Supply Chain, and other business leaders to identify and mitigate safety, environmental, and operational risks.
  • Support facility expansions, capital projects, process changes, and equipment installations by incorporating environmental health and safety requirements and risk mitigation measures into project planning and execution.
  • Serve as a strategic advisor to the Business Continuity Program and incorporate environmental health and safety considerations into governance, resources, and organizational readiness.
  • Partner with the Business Continuity Manager and business leaders to establish environmental health and safety priorities, review preparedness and recovery capabilities, and improve business continuity programs.
  • Design, implement, and maintain hazardous materials programs, including mandated reporting and recordkeeping.
  • Lead and support emergency response activities and programs.
  • Manage chemical handling programs covering chemical use, storage, handling, recycling, and disposal; oversee safety data sheet management and new chemical review.
  • Provide recommendations and programs for compliance with applicable regulatory agencies, including the Occupational Safety and Health Administration, Environmental Protection Agency, and Department of Transportation.
  • Ensure environmental health and safety programs, policies, procedures, and management systems support regulatory compliance and the organization's ISO 9001 and ISO 14001 management systems.
  • Conduct, schedule, and maintain ISO 14001 internal audit programs and related corrective action activities.
  • Ensure fire safety systems, including fire sprinklers, alarms, suppression systems, and extinguishers, are maintained in compliance with applicable regulations.
  • Partner with Human Resources and Learning and Development to design, implement, and maintain safety training programs and documentation.
  • Create and maintain facility-specific emergency response plans and oversee safety committee activities.
  • Ensure compliance reports, including TRI, Right-to-Know, and OSHA 300 filings, are completed accurately and submitted on time.
  • Obtain and maintain environmental, safety, and operational permits required by applicable laws and regulations.
  • Evaluate company operations, equipment, facilities, and processes to identify hazards, determine controls, and establish requirements for personal protective equipment, ventilation systems, industrial hygiene monitoring, and risk reduction.
  • Oversee procurement and availability of safety equipment and safety training resources.
  • Complete and maintain applicable certifications, including Department of Transportation/IATA Dangerous Goods certification, HAZWOPER training, and required Certificates of Fitness.
  • Lead incident investigations for safety and environmental incidents, including root cause analysis, corrective actions, lessons learned, and sustainable risk reduction measures.
  • Maintain the automated external defibrillator management program and ensure required inspections and training are completed.
  • Directly manage EH&S personnel activities.
  • Occasionally travel, including some overnight travel, as required.
Desired Qualifications
  • Business continuity experience is a plus.
  • OSHA 30 certification is preferred.

About the company

Mini-Circuits designs, manufactures, and distributes RF, intermediate-frequency (IF), and microwave components and integrated assemblies. It serves commercial, industrial, space, and military sectors with a catalog of over 27 product lines and more than 10,000 active models, ranging from surface-mount to connectorized formats. The company operates with vertical integration, controlling design through shipment, which enables strict quality control and rapid delivery of off-the-shelf products. It also offers custom-designed solutions and has recently qualified automotive-grade components, signaling a push into high-growth markets. The goal is to be a reliable, diversified supplier by meeting exact customer requirements with ready-to-ship parts while expanding into new applications and industries.

Company Size

201-500

Company Stage

N/A

Total Funding

N/A

Headquarters

null

Founded

1969

Get referred to Mini-Circuits

See people who can refer or advise you

Simplify Jobs

Simplify's Take

What believers are saying

  • September 28, 2026 Mini-Bench expands Mini-Circuits from components into sticky test software.
  • August 2026 Bioz partnership targets quantum-computing buyers and strengthens sales enablement.
  • September 2026 GaN-on-SiC amplifiers and October 2026 EMS setup support aerospace and satcom growth.

What critics are saying

  • Qorvo, Skyworks, and Analog Devices compress margins in 2027 with integrated RF platforms.
  • Mini-Bench and new GaN MMICs must win designs before incumbents standardize competing stacks.
  • Private-company opacity hides demand, workforce, and margin stress; a bad 2027 cycle crushes scale.

What makes Mini-Circuits unique

  • Mini-Circuits ships 10,000-plus stocked RF models from vertically integrated U.S. operations.
  • Its September 2026 Mini-Bench platform unifies sensors, visualization, and analysis across operating systems.
  • Bioz Badges and a Quantum Computing Hub tie products to peer-reviewed validation.

Help us improve and share your feedback! Did you find this helpful?

Benefits

Health Insurance

Dental Insurance

Vision Insurance

Disability Insurance

Life Insurance

Wellness Program

Commuter Benefits

Paid Vacation

Company News

RF Design
Oct 7th, 2026
Mini-Circuits introduces Butler matrices for repeatable 5G and Wi-Fi MIMO testing.

Mini-Circuits introduces Butler matrices for repeatable 5G and Wi-Fi MIMO testing. Mini-Circuits has released a family of high-performance Butler matrices, designed to help engineers reproduce controlled RF phase relationships and multipath propagation conditions in laboratory and production test environments. Covering key Wi-Fi and 5G FR1 frequency bands, the five models provide bidirectional signal transfer between all inputs and outputs while maintaining controlled phase relationships, amplitude balance, and insertion loss across their operating bands. The Butler matrix architecture is particularly useful for antenna beamforming development and evaluation of MIMO transmitters and receivers. By providing multiple precisely related RF signal paths, the matrices allow engineers to emulate multipath conditions that normally occur during over-the-air transmission without requiring an OTA environment. Every unit is 100% tested for highly repeatable performance. The portfolio includes two 4 x 4 models and three 8 x 8 models, all with SMA connectors: * ZBLR-4X4-0672 - 4 inputs and 4 outputs covering 600 to 7250 MHz, with 7 dB typical loss and a 45° phase increment between adjacent outputs. * ZBLR-4X4E - 4 x 4 configuration covering 2000 to 8000 MHz, with 7 dB typical loss and a 45° phase increment. * ZBLR-8X8-0650 - 8 inputs and 8 outputs covering 600 to 5000 MHz, with 12 dB typical loss and a 22.5° phase increment. * ZBLR-8X8E - 8 x 8 configuration covering 2400 to 7200 MHz, with 10 dB typical loss and a 22.5° phase increment. * ZBLR-8X8-0672 - 8 x 8 configuration covering 600 to 7250 MHz, with 10 dB typical loss and a 22.5° phase increment. Designed for Controlled Phase and Amplitude Performance A key characteristic of the Butler matrix is its defined phase progression between adjacent outputs. The 4 x 4 models provide a 45° phase offset, while the 8 x 8 models provide a 22.5° offset. These phase relationships enable controlled excitation of multiple antenna paths, making the devices suitable for beamforming and MIMO test applications. The product design uses high-performance passive components and custom phase-matched cables to maintain phase and amplitude performance across the specified frequency bands. This approach provides low amplitude unbalance and controlled loss across the operating range, with every unit subjected to 100% testing. For applications requiring programmable path loss in addition to phase-controlled signal distribution, Mini-Circuits also offers multi-channel attenuators that can be used with Butler and other n x m matrices. These attenuators support individually controlled attenuation, fading, sweep and hop sequences, with USB and Ethernet control and automation capabilities through Python, LabVIEW and other programming environments. Get in touch for orders or any queries: [email protected] / +27 21 555 8400

Engineers Garage
Oct 7th, 2026
Mini-Circuits releases Butler matrices for MIMO testing.

Mini-Circuits releases Butler matrices for MIMO testing. Mini-Circuits has released a family of 4 x 4 and 8 x 8 Butler matrices for Wi-Fi and 5G FR1 antenna beamforming and MIMO test applications. The bidirectional matrices cover frequencies from 600 MHz to 8 GHz, with 4 x 4 models providing 45-degree phase increments and 8 x 8 models providing 22.5-degree increments. SMA connectors and 100% testing support repeatable signal distribution for laboratory and production environments where engineers need to emulate multipath conditions without over-the-air testing.

RF Design
Sep 30th, 2026
Mini-Circuits introduces Mini-Bench(TM) RF measurement platform for streamlined power sensor testing.

Mini-Circuits introduces Mini-Bench(TM) RF measurement platform for streamlined power sensor testing. Mini-Circuits will introduce Mini-Bench(TM), a new RF test and measurement software platform designed to simplify instrument setup, improve workflow efficiency and provide engineers with enhanced tools for measurement visualization and analysis at the European Microwave Week 2026, October 6-8 at ExCeL London in Booth A40A. Mini-Bench provides a modern, intuitive user interface for Mini-Circuits' PWR-Series high-performance power sensors. The platform lets users control multiple USB- and Ethernet-connected instruments from a single interface while speeding up setup and configuration. Built on customer feedback and real-world application requirements, Mini-Bench streamlines common measurement tasks while maintaining access to advanced test capabilities. The software supports Windows, macOS, and Linux systems. Advanced Measurement and Analysis Tools Mini-Bench gives engineers and technicians a flexible environment to configure measurements and analyze RF signals. Customizable measurement displays allow users to organize information for specific test requirements, while graphical tools provide greater visibility into device and system performance. Measurement capabilities include graphical power trend plots, pulse and modulation profile traces, dual profile traces for high-resolution analysis, measurement averaging, offset and relative measurements, and markers with delta-marker calculations. Users can also export measurement data and graph traces and schedule recordings for longer-term testing and analysis. A simulated sensor capability enables users to evaluate the software and become familiar with its operation before connecting hardware. The Mini-Bench interface can display multiple sensor measurements simultaneously while providing detailed graphical views of pulse and modulation characteristics. Instrument status, measurement values, configuration controls, and graphical analysis are brought together in a single workspace, helping users move efficiently from setup through measurement and analysis. Designed for Mini-Circuits' PWR-Series Power Sensors Mini-Bench complements Mini-Circuits' expanding family of PWR-Series RF and microwave power sensors. The product family includes sensors covering frequencies up to 40 GHz and supports measurements from CW and single-tone signals to pulsed signals and modern digital modulation formats. Simplifying the RF Test Workflow By combining instrument control, measurement configuration, visualization and data analysis in one platform, Mini-Bench helps reduce the time engineers spend configuring test equipment and managing separate measurement workflows. Its intuitive navigation makes the platform accessible to new users while providing the measurement and analysis functionality experienced RF test engineers require. Mini-Bench software, supporting documentation and information on compatible PWR-Series power sensors are available on the Mini-Circuits website. Get in touch for orders or any queries: [email protected] / +27 21 555 8400

RF Design
Aug 27th, 2026
Mini-Circuits new model alert: 7/16 DIN Adapters.

Mini-Circuits new model alert: 7/16 DIN Adapters. DC to 6 GHz, 7/16 DIN Adapters, Low Insertion Loss & Excellent VSWR Mini-Circuits' new series of 7/16 DIN adapters support a wide range of applications from DC to 6 GHz. They provide excellent VSWR and low insertion loss over the frequency band. They feature passivated stainless steel construction with gold-plated beryllium copper center pins. These 7/16 DIN connectors are best suited for high-power, multi-transmitter RF systems in aerospace/defense, outdoor telecom, broadcast, and industrial environments where durability and reliability are critical. Key Features: * Ultra-Wideband, DC to 6 GHz * Low Insertion Loss, Down to .02 dB at 6 GHz * Excellent VSWR, Down to 1.05 at 6 GHz * DIN-DIN & DIN-N-Type Options * Straight & Right Angle Get in touch for orders or any queries: [email protected] / +27 21 555 8400

Engineers Garage
Aug 26th, 2026
Mini-Circuits launches GaN-on-SiC MMIC amplifiers up to 6 GHz.

Mini-Circuits launches GaN-on-SiC MMIC amplifiers up to 6 GHz. Mini-Circuits has announced two GaN-on-SiC HEMT MMIC power amplifiers, GNA-63-5W+ and GNA-252-5W+, for defense, communications, satellite and test systems. The GNA-63-5W+ operates from 10 MHz to 6 GHz with typical saturated output power of +38.5 dBm, 12 dB gain and 35% PAE, while the GNA-252-5W+ covers 10 MHz to 2.5 GHz with typical saturated output power of +40 dBm, 13.5 dB gain and 47% PAE. Both parts are internally matched to 50 ohms, run from a +28 V supply with 400 mA quiescent current and support -55°C to +95°C operation, which helps reduce external matching components, board space and design time.