P

Peak Energy

Manufactures sodium-ion energy storage batteries

Automation Engineer

Full-Time
$160k - $210k+ Equity opportunities
Mid
Bachelor's, Master's
Sacramento, CA, USA
In Person
Electrical EngineeringControls & Automation Engineering

About the job

Requirements
  • Hands-on technical experience with Beckhoff programmable logic controllers (PLCs), TwinCAT v3, and TwinCAT HMI, including writing and assessing code.
  • Fanuc robot programming using TP (teach pendant) and ROBOGUIDE, including developing, simulating, and deploying robot programs offline before installation.
  • Experience integrating vision systems into PLC and robot control logic, including pass/fail signal handling and communication with automation controllers.
  • Proficiency with industrial network protocols including EtherCAT, EtherNet/IP, and PROFINET, including configuring and troubleshooting device-level communications.
  • Working knowledge of robot-cell safety architecture, including safety-rated controllers, guarding design, light curtains, and safety I/O integration.
  • Experience supporting or leading Factory Acceptance Tests (FATs) and Site Acceptance Tests (SATs) for industrial manufacturing equipment, including working with third-party vendors.
  • Experience taking technical ownership of manufacturing equipment, troubleshooting issues, maintaining uptime, and improving yield and cycle time.
  • Proficiency with supervisory control and data acquisition (SCADA) systems, human-machine interface (HMI) design, and industrial data acquisition platforms.
  • Experience establishing connectivity between PLC/SCADA systems and manufacturing execution system (MES) platforms for production traceability and data acquisition.
  • Ability to produce clear control system designs, procedures, and change records.
  • Comfort working as the most senior individual contributor on a new team while standards and procedures are being established.
  • BS or MS in Electrical Engineering, Control Systems Engineering, or a related engineering discipline, or equivalent hands-on experience.
  • Willingness to travel occasionally, including internationally, for Factory Acceptance Tests at vendor facilities.
Responsibilities
  • Participate in design reviews for the acquisition of third-party-designed and programmed manufacturing equipment, providing technical input on automation architecture, PLC platform compatibility, and control system specifications.
  • Participate in Factory Acceptance Tests at vendor facilities to validate that systems meet requirements before shipment.
  • Support Site Acceptance Tests during installation and commissioning of incoming equipment at the Sacramento facility.
  • Take technical ownership of commissioned third-party equipment, maintaining system uptime, troubleshooting control-system issues, and implementing targeted improvements to yield and cycle time.
  • Collaborate with a peer Controls Engineer on program loading and commissioning of in-house-designed manufacturing equipment.
  • Develop working knowledge of in-house equipment control architecture and progressively take ownership as systems are commissioned and stabilized.
  • Once ownership is established for in-house equipment, apply the same uptime and improvement standards as for third-party equipment.
  • Design, configure, and maintain PLC programs using Beckhoff TwinCAT v3 to optimize production and ensure quality across facility equipment.
  • Design and maintain SCADA systems and HMI interfaces using TwinCAT HMI as the primary platform, providing operators and engineers visibility into equipment status and performance.
  • Establish and maintain connectivity between PLCs and MES systems for real-time production data, traceability, and process monitoring.
  • Implement data acquisition systems to collect and analyze production data, and use that data to identify and drive process improvements.
  • Develop and maintain safety systems, including emergency shutdown procedures and safety interlocks, in compliance with applicable regulatory requirements.
  • Create and maintain automation documentation, including control system designs, change management records, operator manuals, and maintenance procedures.
  • Collaborate with equipment engineers, process engineers, and manufacturing leadership to ensure automation systems support production goals.
  • Support root-cause analysis of control-system issues and systematically document findings and corrective actions.
Desired Qualifications
  • Hands-on experience with welding systems, adhesive dispensing equipment, or torque tooling in an industrial manufacturing environment.
  • Experience with Cognex vision systems, including In-Sight or VisionPro, for inspection, guidance, or identification applications.
  • Experience with force/torque sensing in compliant assembly applications.
  • Experience integrating barcode or QR-code scanning systems with MES for cell-level production traceability.
  • Experience in battery manufacturing, semiconductor manufacturing, or other high-precision industrial environments.
  • Familiarity with Ignition by Inductive Automation for SCADA and data acquisition.
  • Experience at a company scaling from pilot production to commercial-scale manufacturing.
  • Familiarity with Battery Energy Storage System (BESS) assembly processes and equipment.
  • Comfort using modern AI tools in day-to-day workflow, including Claude.

About the company

Peak Energy develops and deploys sodium-ion battery systems for energy storage. It operates a large-scale manufacturing approach using a US-based gigafactory to produce sodium-ion batteries that are cheaper, safer, and more abundant than lithium-ion options. The product works by scaling the production of sodium-ion cells and modules to provide storage solutions for renewable energy producers, businesses, and homeowners, enabling reliable and cost-effective energy storage. Compared to competitors, Peak Energy differentiates itself with the first US-based sodium-ion gigafactory, a leadership team with experience from Tesla, Northvolt, SunPower, Fluence, and Enovix, and a focus on domestic supply chains to reduce price volatility and environmental impact. The company aims to set sodium-ion storage as the standard for the new era of renewable energy by delivering high-volume, cost-competitive storage at scale.

Company Size

51-200

Company Stage

Series B

Total Funding

$173M

Headquarters

Denver, Colorado

Founded

2023

Get referred to Peak Energy

See people who can refer or advise you

Simplify Jobs

Simplify's Take

What believers are saying

  • Peak claims over 6 GWh of customer commitments, including Jupiter Power’s 4.75 GWh deal.
  • The Sacramento factory won a $10.5 million California tax credit, lowering buildout burden.
  • Data-center and grid-storage demand surged in 2026, directly expanding Peak’s target market.

What critics are saying

  • CATL shipped commercial sodium-ion storage in July 2026, compressing Peak’s technology lead.
  • Peak must ramp Sacramento by Q1 2027 before Jupiter Power, Energy Vault, and RWE commitments.
  • If sodium-ion costs or durability miss targets, lithium suppliers and CATL will outscale Peak.

What makes Peak Energy unique

  • Peak Energy is America’s first dedicated grid-scale sodium-ion manufacturer, targeting 4 GWh in Sacramento.
  • Its passively cooled sodium systems cut complexity and operating cost versus lithium-ion storage.
  • GM’s June 2026 partnership validates Peak’s domestic supply-chain pitch and engineering credibility.

Help us improve and share your feedback! Did you find this helpful?

Benefits

  • Health Insurance
  • Dental Insurance
  • Vision Insurance
  • 401(k) Retirement Plan
  • Company Equity

Growth & Insights and Company News

6 month growth

2%

1 year growth

-2%

2 year growth

3%
PR Newswire
Oct 21st, 2026
Peak Energy raises $108 million in new Capital; announces oversubscribed Series B to scale next-generation energy infrastructure.

Peak Energy raises $108 million in new Capital; announces oversubscribed Series B to scale next-generation energy infrastructure. Oct 21, 2026, 08:00 ET Funding supports Peak as it scales domestic manufacturing and expands its passively cooled sodium-ion platform into data center power infrastructure BURLINGAME, Calif., Oct. 21, 2026 /PRNewswire/ - Peak Energy, the leading developer of passively cooled sodium-ion energy storage systems for the grid, today announced the closing of its oversubscribed Series B financing round led by General Motors Ventures with participation from Maverick Silicon, Infinite Capital, Eclipse, Xora Innovation, and LG Technology Ventures. The new $108 million in financing positions Peak to scale domestic manufacturing, fulfill over $1 billion in existing customer orders, and launch its product to the data center market where access to power has become the primary constraint on growth. "Peak's mission from day one has been to lower the cost of energy through safer, simpler, cleaner, and more reliable technology," said Landon Mossburg, co-Founder and Chief Executive Officer of Peak Energy. "The investment we announce today will supercharge Peak's ability to scale and deliver as the world increasingly turns to passively cooled sodium-ion storage to solve our energy needs." In just three years, Peak Energy has taken sodium-ion from a promising concept to a global category now widely recognized as the leading alternative to lithium-ion for grid-scale applications. With more than $1 billion in customer commitments and growing demand from utilities, power producers, and data centers, the company continues to strengthen its market leadership. The financing follows a period of significant progress for Peak. In June, the company announced a partnership with General Motors to jointly develop next generation sodium-ion battery cells for the storage market, leverage GM's U.S.-based battery cell industrialization expertise to support Peak, and in July unveiled its 4 GWh factory in Sacramento, CA, which will start production in Q1 2027. "GM Ventures is investing to help Peak Energy continue to scale this innovative technology because we believe it has significant potential in the energy storage market as a safe, cost-effective solution using abundant, domestically sourced materials," said Kevin McCabe, president of GM Ventures. Peak's flagship passively cooled energy storage system is engineered to address the components that make energy storage expensive to operate and maintain. With a fundamentally simpler architecture, Peak can reduce the cost of energy by up to 20% compared with conventional storage systems. By eliminating wasteful cooling systems, reducing energy waste, and requiring zero planned maintenance, Peak systems deliver longer operating life and lower lifetime ownership costs - enabling a lower-cost and more reliable alternative to conventional energy storage technology. "We spent a lot of time looking at the growing power requirements around AI infrastructure, and it became clear that energy storage is going to be an increasingly important part of the solution. Peak is taking a differentiated approach to sodium-ion, with a focus on the full system from chemistry and design through manufacturing and deployment at scale," said Kenneth Safar, Managing Director at Maverick Silicon. "The combination of strong technical progress, growing customer engagement and a large end market gives Peak an opportunity to build a defining platform in energy storage. We're excited to support the team as they scale." Peak's system emits virtually no noise, consumes zero water, and eliminates the leading causes of battery fires, providing a safer and more community-friendly alternative for energy storage. As AI-driven demand accelerates, data center operators need storage solutions that are not only better for the community but also deliver more usable power. The result is a solution that addresses community and ratepayer concerns around affordability and safety while improving reliability and energy efficiency for data center operators. ABOUT PEAK ENERGY: Founded in 2023, Peak Energy is delivering low-cost, giga-scale energy storage purpose-built to meet today's grid challenges. Built by veterans from Tesla, Enovix, and Fluence, the company's proprietary passive cooling platform makes grid-scale storage safer, simpler, and more affordable. The company has secured over $1 billion in commercial agreements, including deals with Jupiter Power, RWE, and Energy Vault, and in June 2026 announced a strategic partnership with General Motors, backed by a GM Ventures investment, to develop next-generation storage cells purpose-built for the grid. Peak is scaling domestic production through a new 4GWh manufacturing facility in Sacramento, California. For more information, visit www.peakenergy.com. SOURCE Peak Energy Technologies

Bloomberg Law
Oct 21st, 2026
GM leads $108M Series B round for sodium-ion battery startup Peak Energy

General Motors led a $108 million Series B funding round for Peak Energy, a startup making sodium-ion batteries. The money will help expand manufacturing at Peak's California plant. Peak says its technology tolerates higher operating temperatures than lithium-ion cells. It claims this brings cost and safety advantages for data centres, grids, and independent power producers. The company is expanding as demand for sodium-ion batteries is forecast to grow from just over 1 gigawatt-hour in 2025 to 257 gigawatt-hours by 2035.

Morning Top News
Sep 12th, 2026
GM plans U.S. battery development as Trump's DOT attacks Ford for China ties.

GM plans U.S. battery development as Trump's DOT attacks Ford for China ties. Advertisements Kurt Kelty, GM's vice president of battery and sustainability, speaks June 9, 2026, during the automaker's "Empower" event in which it announced the development of sodium-ion batteries for energy storage systems. Courtesy GM DETROIT - General Motors is in the early stages of developing next-generation battery cells that the company believes can reduce U.S. dependence on China, while boosting domestically sourced materials. "We're developing a supply chain such that, two years from now, three years from now, it will be domestic," Kurt Kelty, GM vice president of battery and sustainability, told CNBC during an exclusive interview. "That's what we're aiming for - when we get into market, we've got a domestic source for that." Kelty was referring mainly to battery cells that the automaker expects to use in energy storage systems, or ESS, which are stationary devices for homes and businesses, including data centers. But the company plans to similarly prioritize domestic battery cell production for its future all-electric vehicles, a spokesperson reaffirmed to CNBC. Kelty's comments came days before GM's crosstown rival Ford Motor fielded criticism by the Trump administration for its ties to Chinese companies, including for domestic battery cell production. For ESS, GM has partnered with Denver-based startup Peak Energy to develop sodium-ion battery cells. The idea is to lower the need for materials that China dominates - such as lithium and ferrous sulfate, a byproduct of titanium production - and instead, use domestic-made batteries utilizing more prevalent materials in the U.S., such as sodium from soda ash. GM is working on a variety of battery chemistries for different applications of ESS as well as its EVs. Much like baking, each ingredient and the amount put into a battery cell can change the outcome of the product. In the case of battery cells, that can mean differences in performance, cost and stability. GM expects to launch commercial production of sodium-ion battery cells with Peak around 2029. In the meantime, it's producing other chemistries for ESS and EVs that use undisclosed amounts of materials from China. General Motors energy is seen at the New York International Auto Show on April 16, 2025. Danielle DeVries | CNBC Most battery cells currently rely on raw materials from China. The International Energy Agency reports the country produces about 85% of the world's EV battery cathode active material and more than 90% of anode active material, leading to an 80% control of battery production. For example, China largely controls the sourcing and production of lithium iron phosphate, or LFP, batteries through its supply chains. GM currently manufactures LFP cells with its partner LG Energy Solution in the U.S. for ESS, while Ford has licensed technology from China's CATL for LFP battery cells for its EVs and ESS plans. "It's a really good story, because you've got the resources [in the U.S.] that you can keep it totally domestic," Kelty said. "It's going to take some time to build this industry up, but the potential for sodium-ion is just much greater than LFP." At a foundational level, a sodium-ion battery works much like a lithium-ion battery, but GM says it has the potential to perform across a wider range of temperatures and for more cycles. Courtesy GM The Trump administration has placed particular focus on building up the U.S. battery supply chain and reducing its reliance on China. And, earlier this week, Transportation Secretary Sean Duffy expressed "profound concern" over Ford's China ties, specifically citing the CATL licensing. That's despite Ford being the top-producing automaker of vehicles in the U.S. Kelty, days earlier, said of Ford, "they're following a different path." "We think it's more valuable to develop this all domestically, take advantage of domestic supply chains, and develop a technology that's actually better than the incumbent technology," said Kelty, a former battery executive with U.S. EV leader Tesla. 'Leapfrog' China tech? Sam Abuelsamid, a battery expert and vice president of market research at Telemetry, noted it will likely take years to domesticate a battery supply chain. At the same time, China continues to develop and produce new types of chemistries, including sodium-ion. "There's no reason why the LFP materials couldn't also be produced here," Abuelsamid said. "There's ways to do that, but... the sodium-ion would be even cheaper and easier to do." Kelty numerous times said GM hopes to "leapfrog" China's battery technologies, noting that competing directly with Chinese supply chains or mimicking what that market has already established would be difficult. "The better thing to do is try to leapfrog, come up with a different technology that's actually better that we can actually source here," Kelty said. Kelty said he views sodium-ion as the best solution for ESS, because its chemistry and temperature tolerance allow for the cells to function without active cooling - a major source of cost and complexity associated with ESS. That improvement means lowering the cost of ownership for energy storage, he said. The Warren Battery Cell Innovation Center on General Motors' global tech and design campus in suburban Detroit. Photo by Steve Fecht for General Motors The Detroit automaker is spending $900 million on new battery lab facilities at its global tech campus in suburban Detroit. That includes a more-than-500,000-square-foot facility for prototyping manufacturing of cells that's set to begin operations later this year. Still, that funding amount is small compared with what would be needed to substantially loosen China's grip on the industry. "We are purposely going down the path of having American-developed technology," Kelty said. "Batteries are really critical for a lot of different areas of of our economy here." - CNBC's Robert Ferris contributed to this report.

WebProNews
Sep 9th, 2026
Automakers turn to salt for the next battery breakthrough.

Automakers turn to salt for the next battery breakthrough. GM, CATL, BYD and others race to commercialize sodium-ion batteries for grid storage and affordable EVs. Abundant raw materials, strong safety, and wide temperature performance drive adoption even as energy density trails lithium-ion. Recent deals and production ramps signal accelerating momentum. Wednesday, September 9, 2026 General Motors just placed a sizable wager on batteries built from the same element that seasons dinner tables. The Detroit automaker announced a partnership with startup Peak Energy to develop and produce sodium-ion cells aimed squarely at grid-scale energy storage. Production is slated for Michigan starting in 2028. The move marks one of the most visible Western bets yet on a technology long dominated by Chinese manufacturers. But GM isn't alone. Across the Pacific, CATL and BYD have poured billions into sodium-ion factories. Their cells already power some Chinese electric vehicles and are heading into more. The stakes have risen sharply this year. Surging electricity demand from AI data centers has automakers and battery makers scrambling for alternatives to lithium that can scale fast and cost less over decades of use. The original Yahoo Autos report highlighted how several car companies are exploring this different kind of electric powertrain chemistry to sidestep lithium supply risks. That piece, published last year, captured early momentum. Yahoo Autos noted prototypes and small production runs already on Chinese roads. Since then the field has accelerated. Kurt Kelty, GM's vice president of battery and sustainability, didn't mince words. "Instead of making an LFP cell that everybody else makes using Chinese technology that everybody else is using... we're developing a better technology that enables us to leapfrog the competition," he told the Financial Times in June. The company sees sodium-ion as ideal for stationary storage because it handles wide temperature swings, lasts longer in daily cycling, and avoids the geopolitical headaches tied to lithium processing. Peak Energy signed a $500 million deal with Jupiter Power last year to deliver up to 4.75 gigawatt-hours of sodium-ion storage by 2030. GM's investment and joint development add muscle. The two plan material and component work this year, followed by prototyping in Michigan. No active cooling needed for the prismatic cells. That simplifies packs and trims costs further. And the advantages stack up. Sodium sits 1,000 times more abundant than lithium. Mining it leaves a lighter environmental mark. Cells resist fire better in many tests. They perform well in extreme cold, retaining over 90 percent capacity at minus 40 degrees Celsius according to CATL data. But energy density still trails. Most sodium-ion packs deliver 140 to 175 watt-hours per kilogram. That limits them in premium passenger cars chasing 300-mile ranges. Chinese firms moved first. JAC Motors, backed by Volkswagen Group, launched the Yiwei E10X in late 2023. It became the first mass-produced EV with a sodium-ion battery pack. Automotive News reported the milestone in February. The car targets urban buyers who value lower price over maximum range. BYD broke ground on a 30-gigawatt-hour sodium plant in Xuzhou. CATL unveiled its Naxtra sodium-ion line and signed a 60-gigawatt-hour supply agreement with Beijing HyperStrong Technology for energy storage projects. Recent momentum shows no sign of slowing. In late August, battery maker Xupai began series production of 12-volt sodium-ion batteries for BAIC Arcfox electric vehicles, replacing traditional lead-acid units for auxiliary power. Heise Autos covered the shift on September 1. BAIC researchers have also developed prismatic sodium cells exceeding 170 watt-hours per kilogram for potential traction use. The low-voltage application offers a low-risk entry point while the industry scales higher-density versions. European and American players have taken notice. Stellantis Ventures invested in French startup Tiamat. Volvo's technology fund backed Sweden's Altris. Renault's joint venture JMEV offers an EV3 model with sodium-ion option in China. Even so, the bulk of commercial progress remains in Asia. Shipments of sodium-ion batteries reached 9 gigawatt-hours last year, up 150 percent from 2024. Projections point past 1,000 gigawatt-hours by 2030. GM insists its sodium cells won't power its own EVs anytime soon. Energy density remains too low compared with its lithium-manganese-rich chemistry arriving in volume by 2028. Kelty told InsideEVs the focus stays on storage systems that can run for 20 to 25 years with minimal maintenance. Data centers and renewable integration need exactly that profile. Yet the door hasn't slammed shut. CATL claims its latest sodium cells hit 175 watt-hours per kilogram, competitive with many LFP packs. The company expects cost parity with LFP by the end of this year. A September 7 research paper from Nanjing University described an iron-mediated cathode strategy that achieved 206 watt-hours per kilogram in a pouch cell with strong cycle life. Interesting Engineering reported the advance just days ago. Incremental gains keep narrowing the gap. Supply chain security drives much of the Western interest. China controls the majority of lithium refining and a commanding share of battery manufacturing. Sodium sidesteps that. No cobalt. No nickel in many formulations. Aluminum current collectors replace copper on both electrodes at CATL, trimming expense. "We believe sodium-ion will be a defining chemistry for grid-scale energy storage systems in the years ahead," Kelty said in a Reuters interview. The Reuters story from late June captured the broader frenzy. Ford launched an energy storage business. GM redirects some LFP capacity from vehicles to stationary uses. Peak Energy teamed with Energy Vault for software that optimizes sodium systems. Demand for dispatchable power has exploded as utilities race to support new data centers. Challenges remain. Sodium-ion cells weigh more for the same energy. Fast charging helps, but calendar aging and long-term durability in real-world grids still need years of data. Costs have not yet dropped as far as hoped despite abundant raw materials. Early plants run below full capacity. Still, the trajectory looks clear. Morgan Stanley analysts forecast sodium-ion reaching 20 percent of battery deployments by 2030 and 37 percent by 2035. Automakers face a split road. Premium brands chase ever-higher energy density with silicon anodes, lithium-metal, and eventually solid-state packs. Mass-market and fleet operators eye sodium for vehicles that rarely travel long distances. City delivery vans, scooters, and low-speed electric cars already use the chemistry successfully. Yadea launched multiple sodium-powered two-wheelers in 2025. Swapping stations in Shenzhen support them. GM's Kurt Kelty spent years at Tesla before joining the American giant. His experience shapes a pragmatic approach. Multiple battery chemistries in the portfolio. LFP for near-term affordable EVs and storage. Lithium-manganese-rich for trucks. Sodium for long-life stationary systems. The company committed $900 million to battery research. Bringing supply chains to North America matters as much as the chemistry itself. Chinese leaders express similar confidence, but from a position of scale. CATL chairman Robin Zeng has said the U.S. market will eventually boom and that his company's expertise will prove hard to replicate. Recent WSJ coverage of CATL's profit growth despite softer EV sales in China underscores the firm's pivot toward storage. Energy systems now drive much of its growth. So the competition intensifies. Western automakers and startups race to commercialize sodium without relying on Asian supply chains. Chinese giants scale production and sign ever-larger offtake agreements. Both sides bet that abundant salt-based batteries can stabilize power grids, lower long-term costs, and reduce dependence on scarce metals. The technology won't replace lithium-ion across the board. It doesn't need to. In a world hungry for every clean kilowatt-hour, different applications reward different strengths. Production lines are already humming in China. Pilot plants in California and Michigan are gearing up. The next few years will reveal which bets pay off first. For now the salt battery is no longer a laboratory curiosity. It has entered the mainstream race for the future of electric power. Subscribe for Updates

BayStreet.ca
Sep 8th, 2026
GM, Ford turn EV battery bust into Energy Storage bet.

GM, Ford turn EV battery bust into Energy Storage bet. The biggest U.S. legacy automakers look to turn the losses from their underutilized electric vehicle battery capacity into a new profitable business to seize the soaring demand for battery storage energy systems. GM and Ford, which, due to poor demand, have written down billions of U.S. dollars of investments in the EV expansion push, are now pivoting to the energy storage business to meet the spike in demand for battery energy storage from data centers and infrastructure to support the electric grid. The underutilized electric vehicle battery capacity, which cost Ford a massive $19.5 billion write-down and GM cumulative $10.9 billion charges as they scaled back their electric vehicle businesses, is now being put to use for battery energy storage systems (BESS). Two of Detroit's Big Three automakers are now competing in offering battery energy storage, too. At the end of 2025, Ford launched a BESS business as it reshuffled its EV strategy to offer only the most competitive EV models and expand customer choice with additional hybrid and gasoline vehicles. To scale up its battery energy storage business, Ford is repurposing existing U.S. battery manufacturing capacity in Glendale, Kentucky. "This strategic initiative will leverage currently underutilized electric vehicle battery capacity to create a new, diversified and profitable revenue stream for Ford. The company also plans to invest roughly $2 billion in the next two years to scale the business," the auto giant said. Ford currently plans to deploy at least 20 GWh of battery storage annually by late 2027. Ford Energy, the new wholly-owned subsidiary of Ford Motor Company, will provide United States-assembled BESS for utilities, data centers, and large industrial and commercial customers in the United States. Ford Energy aims to fill the gap in the U.S. energy storage market created by the convergence of data center growth, renewable energy integration, and grid resilience requirements, it said. In May, Ford Energy announced a five-year framework agreement with EDF power solutions North America, under which EDF power solutions will have the ability to procure up to 4 gigawatt-hours of DC Block BESS annually, representing a total potential volume of up to 20 GWh over the term of the agreement. "We are delivering the kind of predictable quality and long-term operational confidence that grid operators and large-scale developers require," said Lisa Drake, president, Ford Energy. GM has also launched an energy storage business and vehicle-to-grid technology offerings. "To fix a power grid stressed by power-hungry AI data centers, we are also partnering with Peak Energy to develop and deploy built-for-purpose sodium ion chemistry for grid-scale storage systems," the automaker said in June. Even before the launch of the battery storage business, GM had provided repurposed second-life battery packs to help power the largest microgrid in North America at Redwood Materials' installation in Sparks, Nevada. GM says it is now the first automaker working with Redwood Materials to create true circularity across the entire battery lifecycle. After the disappointment with the EV manufacturing business amid crumbling demand in the United States, GM and Ford vie to capture the soaring energy storage market. Earlier this month, the U.S. Energy Storage Market Outlook Q3 2026 by the Solar Energy Industries Association (SEIA) and Benchmark Mineral Intelligence showed that the U.S. installed a record-high energy storage capacity in the second quarter of the year as grid operators and utilities turned to storage to boost grid reliability and meet rising power demand. The industry installed 20.2 gigawatt-hours (GWh) of new capacity in the second quarter of the year, making it the largest quarter for installations on record and bringing total installations in the first half of 2026 to 30.8 GWh, according to the report. Battery energy storage supplied more electricity to the grid in the first eight months of 2026 than in all of 2025, the report showed. Utility-scale battery storage capacity in the United States has jumped over the last three years, with an annual average growth rate of 70%, the U.S. Energy Information Administration (EIA) said last month. By Tsvetana Paraskova for Oilprice.com