S

Skyline Products

Senior Embedded Systems Engineer - Electrical / Firmware

Embedded EngineeringPosted on Nov 19
Full-timeColorado Springs, CO, USA$110k - $140k /yr

About the Job

Requirements

  • A bachelor's degree in Electrical Engineering or Computer Engineering is preferred; a master's degree is a plus.
  • At least 5 years of combined embedded hardware and firmware development experience.
  • Demonstrated systematic troubleshooting across firmware, circuit design, components, assembly, and interconnects, with conclusions supported by data.
  • Ability to read and interpret schematics, datasheets, and PCB layouts, with a solid understanding of analog and digital circuit fundamentals.
  • Hands-on proficiency with oscilloscopes, logic analyzers, digital multimeters, power supplies, and in-circuit debuggers.
  • Proficiency in C in resource-constrained embedded environments; C++ is a plus.
  • Experience with bare-metal microcontroller development and bring-up, such as ARM Cortex-M, PIC, or STM32.
  • Understanding of low-level hardware interfaces, including I2C, SPI, UART, RS-485, Ethernet MAC/PHY, GPIO, and PWM.
  • Working experience with embedded Linux, including user-space applications, networking, SSH and user security, and filesystems.
  • Proficiency in Python for test automation, data capture and analysis, and engineering tools.
  • Experience using Git in shared codebases.
  • Ability to write clear failure-analysis findings for management, customers, and suppliers.
  • Ability to work outdoors in varying weather during field visits, work at heights or from bucket trucks with appropriate safety equipment and training, and lift up to 50 pounds.
  • Valid driver's license.

Responsibilities

  • Lead root-cause investigations of field, production, and lab failures involving firmware, circuitry, components, PCB assembly, cabling and connectors, and environmental stress such as heat, vibration, and moisture; drive issues to verified corrective action.
  • Design, develop, and maintain embedded firmware in C/C++ for bare-metal microcontrollers and RTOS-based platforms.
  • Build and maintain embedded Linux applications and system configuration on sign controllers, including networking, security hardening, storage, and boot configuration.
  • Maintain existing long-lived codebases, ensuring stability, clarity, and documentation.
  • Participate in electronic hardware design through schematic review, PCB layout review, component selection, and board bring-up.
  • Develop and tune RGB LED color mixing, including per-color current and PWM balancing, white-point and color matching across LED bins, and brightness and color consistency over temperature and dimming levels.
  • Evaluate and qualify components for long-life outdoor deployment, including replacements for obsolete or unavailable parts.
  • Design and build test fixtures, automated test rigs, and lab tools using Python and instrumentation to reproduce intermittent failures and validate fixes.
  • Debug hardware and software issues using oscilloscopes, logic and protocol analyzers, JTAG/SWD debuggers, and other bench instruments.
  • Support production, contract manufacturers, and field service through failure analysis, pre-installation sign inspections, and on-site troubleshooting as needed.
  • Design systems for long-term reliability, diagnostics, and field maintainability.
  • Ensure compliance with transportation and industry standards, including NTCIP and NEMA TS 4, for robustness and safety.
  • Write and maintain technical documentation, including design documents, test procedures, failure-analysis reports, and controlled quality documents.

Desired Qualifications

  • Experience with transportation, outdoor industrial, or safety-critical systems.
  • Knowledge of RGB LED color mixing fundamentals, including color spaces, chromaticity, LED binning, and per-channel current/PWM balancing.
  • Familiarity with ITS communication protocols such as NTCIP, SNMP, and multi-drop RS-485.
  • Knowledge of LED display technology, including constant-current LED drivers, PWM grayscale, flicker-free refresh, and LED thermal and failure modes.
  • Experience with RTOS and embedded TCP/IP stacks such as FreeRTOS/lwIP or ThreadX/NetX Duo.
  • Experience with industrial networking, including managed Ethernet switches, cellular modems, and PPP.
  • Experience with PCB design tools such as Altium, KiCad, or OrCAD.
  • Knowledge of PCBA manufacturing and design for manufacturing, including SMT/through-hole assembly, conformal coating, connector selection and retention, and contract-manufacturer failure analysis.
  • Experience with environmental and reliability testing, including thermal testing (−34 to +74 °C per NEMA TS 4 and solar loading), vibration/shock, and accelerated life testing.
  • Knowledge of power management, backup power using supercapacitors or batteries, watchdog timers, and fail-safe system design.
  • Experience with robust field-update mechanisms such as bootloaders and remote updates.
  • Exposure to EMI/EMC considerations in embedded design.
  • Familiarity with ISO 9001 quality systems and corrective-action processes.
  • Experience with Bash shell scripting and Linux/WSL development environments.
  • Experience with 3D CAD and 3D printing for fixtures and small mechanical parts.

About the Company

Company size
Not listed
Company stage
Not listed
Total funding
Not listed
Headquarters
Not listed
Founded
Not listed

Recently Posted Jobs

Explore more opportunities at Skyline Products

See more jobs