In PersonThe position is full-time and non-rotational at headquarters; remote work may be considered case by case.
Electrical Engineering
About the job
Requirements
Interpret and apply applicable codes, procedures, standards, and specifications.
Interpret complex vendor data and drawings for conformance with project requirements.
Develop material takeoffs and estimates.
Operate AutoCAD and other computer-assisted engineering and design software.
Inspect equipment for conformance with design specifications.
Analyze product, equipment, engineering proposal, process, and technical data for electrical and industrial machinery design.
Determine the feasibility of designing new plant equipment or modifying existing facilities based on cost, space, schedule, planning, and technical and economic factors.
Provide accurate technical advice and training to others.
Have design experience involving arctic electrical installations, the National Electrical Code, motors, motor controls, and third-party certifications.
Check designs, diagrams, and drawings for compliance with applicable codes and specifications.
Read and interpret safety rules, operating and maintenance instructions, procedure manuals, written, oral, diagram, and schedule-based instructions.
Write routine reports and correspondence.
Have sufficient mathematics skills to perform calculations involving whole numbers, fractions, decimals, rates, ratios, percentages, and graphs.
Solve practical problems involving limited standardization and concrete variables.
Have working knowledge of Microsoft Word, Microsoft Excel, Microsoft Outlook, and current AutoCAD design software.
Meet the physical requirements of the position, including occasional lifting or moving of up to 25 pounds.
Responsibilities
Design, modify, or develop facilities, testing equipment, machines, equipment, or processes used in processing or manufacturing.
Develop designs that conform accurately and efficiently to applicable codes and specifications.
Initiate resolution of problems identified in vendor data or drawings.
Analyze designs and equipment specifications and performance requirements to determine designs that can be produced by existing facilities and methods.
Provide information to field construction.
Provide technical information concerning manufacturing or processing techniques, materials, properties, and process advantages and limitations for plant and product engineering planning.
Study engineering and technical publications to remain current on industry changes and developments.
Design electrical equipment, facilities, components, products, and systems for commercial, industrial, and domestic purposes.
Design fabrication of test control apparatus and equipment.
Design applications of controls, instruments, and systems for new commercial, domestic, and industrial use.
Use computer-assisted engineering and design software and equipment to perform engineering tasks.
Collaborate within a multidisciplinary engineering and design team.
Perform other duties as assigned.
Desired Qualifications
Oil and gas industry experience.
High-voltage power line design experience.
ETAP experience.
Applicable Arctic or cold-weather experience.
Three-dimensional modeling experience.
Job Description
NANA Worley is accepting applications for multiple positions at varying classifications from Entry-level to Principal Electrical Designers dependent on experience and competencies.
The Electrical Designer position applies engineering principles to design, modify or develop facilities, testing, machines, equipment, or processes used in processing or manufacturing products in a multi-discipline engineering and design team.
*This is a full time, non-rotational position located at NANA Worley headquarters in Anchorage, AK. Remote work option may be considered on a case by case basis*
*This position is eligible for the NANA Worley employee referral program, available only to current NANA Worley employees*
Responsibilities
Interprets and applies codes, procedures, standards, and specifications to accurately and efficiently produce designs which conform to applicable codes and specifications.
Interprets complex vendor data or drawings for conformance with project requirements and initiates resolution of any problems.
Accurately develops material takeoffs and estimates.
Proficiently operates various AutoCAD systems. Uses computer-assisted engineering and design software and equipment to perform design tasks.
Consistently demonstrates example skills in structuring assigned activities, creativity, teamwork, handling a client’s changing needs, communications, operational efficiencies, decision making, and analyzing and solving problems.
Inspects equipment for conformance with design specifications. Analyzes product or equipment specifications and performance requirements to determine designs that can be produced by existing manufacturing or processing facilities and methods.
Analyzes engineering proposals, process requirements and related technical data pertaining to industrial machinery and equipment design.
Determines feasibility of designing new plant equipment or modifying existing facilities considering costs, available space, time limitations, company planning and other technical and economic factors.
Provides information to those in field construction. Provides accurate technical advice and training to others. Provides technical information concerning manufacturing or processing techniques, materials, properties and process advantages and limitations which affect long range plant and product engineering planning.
Studies engineering and technical publications to keep abreast of technical changes and developments in industry.
Design experience, which includes work connected with arctic electrical installations, NEC, motors, motor controls, and third party certifications. Preference will be given to those with experience in high voltage power lines design and/or ETAP.
Checks various designs, diagrams, drawings, etc. for compliance with applicable codes and specifications.
Designs electrical equipment, facilities, components, products, and systems for commercial, industrial, and domestic purposes.
Designs fabrication of test control apparatus and equipment.
Designs applications of controls, instruments, and systems for new commercial, domestic, and industrial use.
Uses computer-assisted engineering and design software and equipment to perform engineering tasks.
Other duties as assigned.
Qualifications
The following describes the education and experience typically required to develop the competencies for each classification level; competencies may be demonstrated with other combinations of education, training, experience, and achievements:
Designer
4-10 years of work experience, with oil and gas industry experienced preferred.
Senior Designer
8-15 years of experience in the oil and gas industry.
Staff Designer
15+ years of experience in the oil and gas industry; or
Associate degree in engineering technology, electrical design, or related degree from an accredited institution and 10+ years of experience.
Senior Staff Designer
17+ years of experience in the oil and gas industry; or
Associate degree in engineering technology, electrical design, or related degree from an accredited institution and 15+ years of experience.
Principal Designer
20+ years of experience in the oil and gas industry; or
15+ years of experience with significant Lead Designer role.
Preferred
Applicable Arctic/cold weather experience.
3-D modeling experience
Language Ability:
Ability to read and interpret documents such as safety rules, operating and maintenance instructions and procedure manuals. Ability to write routine reports and correspondence.
Math Ability:
Math skills sufficient to: Add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Compute rate, ratio, and percent. Draw and interpret bar graphs.
Reasoning Ability:
Solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Interpret an extensive variety of instructions furnished in written, oral, diagram, or schedule form.
Computer Skills:
To perform this job successfully, an individual should have a working knowledge of Microsoft Word, Excel, Outlook, and current versions of AutoCAD design software.
Competencies
To perform the job successfully, an individual should demonstrate the following competencies:
Analytical
Synthesizes complex or diverse information;
Collects and researches data;
Uses intuition and experience to complement data;
Designs workflows and procedures.
Design
Generates creative solutions;
Translates concepts and information into images;
Uses feedback to modify designs;
Applies design principles;
Demonstrates attention to detail.
Problem Solving
Identifies and resolves problems in a timely manner;
Gathers and analyzes information skillfully;
Develops alternative solutions;
Works well in group problem solving situations;
Uses reason even when dealing with emotional topics.
Technical Skills
Assesses own strengths and weaknesses;
Pursues training and development opportunities;
Strives to continuously build knowledge and skills;
Shares expertise with others.
Interpersonal
Focuses on solving conflict, not blaming;
Maintains confidentiality;
Listens to others without interrupting;
Keeps emotions under control;
Remains open to others' ideas and tries new things.
Oral Communication
Speaks clearly and persuasively in positive or negative situations;
Listens and gets clarification;
Responds well to questions;
Demonstrates group presentation skills;
Participates in meetings.
Team Work
Balances team and individual responsibilities;
Exhibits objectivity and openness to others' views;
Gives and welcomes feedback;
Contributes to building a positive team spirit;
Puts success of team above own interests;
Able to build moral and group commitments to goals and objectives;
Supports others’ efforts to succeed;
Recognizes accomplishments of other team members.
Written Communication
Writes clearly and informatively;
Edits work for spelling and grammar;
Varies writing style to meet needs;
Presents numerical data effectively;
Able to read and interpret written information.
Strategic Thinking
Develops strategies to achieve long-term success.
Safety and Security
Observes safety and security procedures.
Working Conditions and Physical Requirements
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
The noise level in the work environment is usually quiet.
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
While performing the duties of this job, the employee is frequently required to sit. The employee is occasionally required to walk; use hands to finger, handle or feel; and talk or hear. The employee must occasionally lift and/or move up to 25 pounds.