R

Regal Rexnord

Automatic transfer switches for backup power

Motor Assembler 2

Product AssemblyConfirmed live in the last 24 hours
Full-timeRadford, VA, USANo salary listed

About the Job

Requirements

  • A high school diploma or GED is required.
  • Good written and verbal communication skills and basic knowledge of arithmetic are required, including simple use of formulas, charts, tables, drawings, specifications, schedules, wiring diagrams, and adjustable measuring instruments, and posting, preparation, interpretation, use, and checking of reports, forms, records, and related materials.
  • The role requires judgment to plan, perform, and make decisions about the sequence of setups, operations, and processes within recognized or standard methods.
  • Continuous mental and visual attention is required for diversified operations requiring constant alertness or activity.
  • The candidate must be self-motivated and self-directed.
  • The role requires lifting over 50 pounds, standing for long periods, pushing and pulling with pressure, and bending, stretching, and reaching high and low locations.
  • Candidates must be a U.S. Person as defined by federal export-control rules or otherwise qualify for a license permitting them to hold the position.

Responsibilities

  • Perform at least three major tasks or jobs identified in the Motor Assembler I job description with little or no assistance, using working knowledge of past and present product lines.
  • Diagnose causes of malfunctions independently and/or with quality personnel and take appropriate corrective action.
  • Assist in process improvement efforts.
  • Assemble standard motors using assembly drawings, shop travelers, outline drawings, and process sheets; use bills of material to pull correct parts and record traceability on pick lists; magnetize small field assemblies; inspect work, including end play, against drawings and quality requirements; and handle materials to prevent damage and contamination.
  • Assemble large motors using assembly drawings, shop travelers, outline drawings, and process sheets; use bills of material to pull correct parts and record traceability on pick lists; magnetize large field assemblies using a large magnetizer; mount large assemblies on horizontal and vertical test stands; handle them safely; inspect work against drawing and quality requirements; and prevent material damage and contamination.
  • Assemble actuators and higher-level assemblies using assembly drawings, shop travelers, outline drawings, and process sheets; use bills of material to pull correct parts and record traceability on pick lists; handle assemblies safely; inspect work for compliance with drawings and quality requirements; and assemble brakes, encoders, and resolvers according to drawings.
  • Perform required mechanical and electrical tests according to instructions and test procedures, including standard frameless and housed tests, large motor tests, and complex motor drive tests involving resolvers, encoders, brakes, environmental tests, and vibration tests; operate Goldline auto tester, MATS test station, and back drive station; complete quality-system test data sheets; and ensure motors meet test requirements.
  • Clean parts to be painted, including motor assemblies, generators, housings, and end bells, ensuring they are free of dirt, grease, oil, and film; mask areas not to be painted using appropriate methods; mix epoxy, lacquer, and enamel with proper thinners and reducers; use the correct mist spray for coverage and minimal overspray; follow degreasing and cleaning procedures for new, rework, and customer-returned parts; and change spray-booth filters as needed to control overspray emissions.
  • Gather wire according to winding data sheets; maintain wire, lamination, and insulator inventory using Kanban; insulate lamination stacks; load parts and run winding-machine programs; unload parts and perform resistance and other specified tests; adjust fixtures and machine parameters such as speed, wire tension, and position offsets; and perform other armature manufacturing processes as required, including crimping, soldering, varnishing, pressing, polishing and coating, sensor assembly and setting, and armature inspection.
  • Gather wire according to winding data sheets; set up winding machines to wind stators; perform crimping, sensor setting and assembly, varnishing, polishing and coating, pressing, and armature inspection; perform resistance tests to determine whether stators are ready for connection; and wind stator types including Goldline and XT.
  • Perform one or more encapsulation operations, including skewing and trickle varnishing, motor encapsulation, and dip-and-bake varnishing, according to established procedures.
  • Assemble rotors by reading blueprints and checking dimensions with appropriate measuring tools; pull correct parts and maintain inventory control; and perform turning and balancing.
  • Perform core-processing duties including bonding and stacking laminations, sandblasting, deburring cores, fluidized-bed coating, and spray painting cores; use drawings, shop travelers, calipers, micrometers, gauges, fixtures, paint booths, sandblasters, files, sanders, ovens, and buffers; and pack RCRA hazardous waste in DOT-approved containers after required training.
  • Perform magnet-processing operations on yoke-ring subassemblies, including cleaning, deburring, bonding, banding, balancing, and spray painting; follow shop travelers and prescribed procedures; use calipers, micrometers, gauges, fixtures, and relevant production equipment and hand tools; mix bonding and paint materials; and pack RCRA hazardous waste in DOT-approved containers after required training.
  • Complete lamination manufacturing operations, including press setup and operation of blanking and notching presses, heat treatment, and inspection of stamped parts.
  • Prepare parts and subassemblies through hand and machine operations; use drawings, operation sheets, published procedures, visual aids, and prescribed tools for hand deburring; select and mount fixtures and accessories to small lathes and milling machines to undercut commutator slots; operate laser undercut machines; balance armatures and stators; and perform rework such as armature patching and precision deburring.
  • Assemble brush-spring segments using drawings and operation sheets; use micrometers to check material width and thickness; spot-weld clips and terminals to springs as required; clean and remove burrs; solder brush blocks to clips and remove excess solder; and perform subassembly operations using micrometers, vernier calipers, punch and forming presses, spot-welding and resistance-soldering machines, vapor-hone machines, soldering irons, microscopes, magnifying glasses, solder, tweezers, sensor-setting equipment, heat treatment, solder-joint inspection, deflashing, and transfer molding.
  • Keep tools and work areas clean and orderly, observe prescribed safety precautions, and perform other tasks or jobs as assigned by the coordinator.

Desired Qualifications

  • A minimum of three years of progressively complex manufacturing experience is preferred.

About the Company

Regal Rexnord

Automatic transfer switches for backup power

Regal Rexnord’s Thomson Power Systems designs and manufactures critical electrical gear that sits between a building’s main power and its backup source. Its core products are automatic transfer switches (ATS) and switchgear, which monitor for power interruptions and seamlessly switch to a backup generator to keep important facilities—like hospitals and data centers—online. The system works with microprocessor-based controls to monitor power conditions and execute transfers quickly and safely, ensuring minimal downtime during outages. The company differentiates itself through a long, focused history in power-control engineering, a niche specialization in backup power for critical infrastructure, and its integration into the Regal Rexnord portfolio, which provides broader industrial component resources and support. The goal is to give reliable, automatic backup power so essential operations stay powered when the main grid falters.

Company size
51-200
Company stage
Not listed
Total funding
Not listed
Headquarters
City of Langley, Canada
Founded
1973

Recently Posted Jobs

Explore more opportunities at Regal Rexnord

See more jobs