Technip Energies

Engineering and technology solutions for energy

Senior Static Equipment Engineer / Static Equipment Engineer

Design EngineeringConfirmed live in the last 24 hours

Full-timeKuala Lumpur, Federal Territory of Kuala Lumpur, MalaysiaNo salary listed

About the Job

Requirements

The candidate must possess a degree in Mechanical Engineering (B.E. Hons).
The candidate must have at least 7 years of engineering design experience with various static equipment for onshore or offshore applications.
The candidate should have 1 to 2 years of site or fabrication experience.
The candidate should be able to apply relevant design codes, industry standards, and practices, including API, ISO, and ASME, and interpret their requirements for project needs.
The candidate should be able to troubleshoot problems by interpreting codes and standards, understand their limitations, and apply them accurately.
The candidate should understand client specifications, such as PTS and DEP, and meet contractual requirements.
The candidate should review ITB, client, and contractual documents and raise clarifications about ambiguities, unclear definitions, missing references, or areas of doubt.
The candidate should understand static equipment applications for onshore and offshore oil, gas, and refinery industries and select appropriate equipment for process-service applications.
The candidate should understand materials for different services, including wet CO2, sour, low-temperature, and toxic services, and review vendor-proposed materials against material grades selected from process inputs, material-selection reports, and corrosion studies.
The candidate should be able to review vendor data against codes, standards, local regulations, project requirements, and discipline requirements.
The candidate should be able to interface with piping/stress, process, civil, electrical, structural, and instrumentation disciplines and resolve interface conflicts.
The candidate should understand equipment fabrication processes and critical elements or paths that influence delivery, and identify ways to improve vendor-equipment delivery schedules.
The candidate should be able to carry out technical audits when requested by the Department Manager; for Senior Engineers, the posting specifies more than 10 years of experience for this duty.
The candidate should be able to investigate and resolve quality complaints or incidents raised by interested parties or requested by the client or project manager.
The candidate should be able to supervise, coach, and guide junior engineers.
The candidate should be willing to travel and be stationed at engineering operating centers or client offices for overseas assignments.
The candidate should maintain professional relationships with clients, peers, equipment vendors, and suppliers.

Responsibilities

Perform detailed engineering design on current onshore and offshore projects and support departmental and engineering operations.
Apply design codes, industry standards, and practices; interpret requirements and resolve issues involving code and standard application.
Review client specifications and project documents, and raise clarifications about ambiguous or incomplete requirements.
Review vendor equipment options, limitations, and deviations, and prepare technical bid evaluations or technical bid tabulations.
Review in-house and vendor P&IDs and identify equipment interfaces.
Witness vendor factory acceptance tests and shop testing, review test reports, and comment on findings.
Resolve issues arising from equipment testing, including failures, deficiencies, underperformance, and discrepancies.
Respond to site technical queries about equipment design, installation, mechanical completion, and field acceptance.
Identify cost-saving and energy-efficiency options during project execution or proposal work when requested and available.
Participate in equipment and project HAZOPs and close out resulting action items.
Prepare calculation spreadsheets, technical data sheets, job and equipment specifications, material requisitions, technical clarifications, technical bid evaluations and tabulations, and equipment-selection studies and reports.
Provide input to other disciplines’ deliverables, including layout and utility requirements, weight data, foundation loading, equipment interfaces, and equipment lists.
Prepare compressor aerodynamics and thermodynamics studies and summaries, and contribute to driver selection and derating.
Conduct vendor data review and meetings, support vendors when needed to shorten review duration, and help achieve project progress.
When assigned as Lead Engineer, monitor progress, coordinate and plan resources, and execute work to meet project objectives and values.
Produce quality engineering deliverables and services that meet joint-venture and client expectations, while fulfilling quality assurance and health, safety, and environment requirements.

Desired Qualifications

Experience with Green Hydrogen, electrolyzer, and Carbon Capture and Storage projects is preferred.

Be part of the solution at Technip Energies and embark on a one-of-a-kind journey. You will be helping to develop cutting-edge solutions to solve real-world energy problems.

We are currently seeking a Senior Static Equipment Engineer to join our team based in Kuala Lumpur, Malaysia.

Successful candidate would be offered fixed term employment.

About us:

Technip Energies is a global technology and engineering powerhouse. With leadership positions in LNG, hydrogen, ethylene, sustainable chemistry, and CO2 management, we are contributing to the development of critical markets such as energy, energy derivatives, decarbonization, and circularity. Our complementary business segments, Technology, Products and Services (TPS) and Project Delivery, turn innovation into scalable and industrial reality.

Through collaboration and excellence in execution, our 17,000+ employees across 34 countries are fully committed to bridging prosperity with sustainability for a world designed to last.

About the mission we offer you:

At Technip Energies, we believe in a better tomorrow, and we believe we can make tomorrow better. With approximately 15,000 talented women and men, we are a global and leading engineering and technology company, with a clear vision to accelerate the energy transition. Designing and delivering added value energy solutions is what we do.

If you share our determination to drive the transition to a low-carbon future, then this could be the job for you.

About The Job

About the role:

Perform engineering detailed design on current projects for onshore /offshore projects and to fulfill Departmental needs and support engineering operation within the Company.

Main Accountabilities

DESIGN BASIS, CODE & STANDARD

Understanding and applying knowledge of design codes, industries standard and practices such as API/ISO/ ASME, etc. and Interpretation of the requirement to meet project requirement

Competent to resolve problems /trouble shoot based on Codes & Standards interpretation

Understand Codes limitation, apply with accuracy and effectiveness.

In-depth understanding of Client’s specification (e.g. PTS, DEP etc.) and provide service which meet contract requirements

Review and raise clarifications on the ITB /Client documents/ Contractual documents in case of ambiguity in definition / lack of clarity / lack of reference/ areas of doubt etc. based on specialist experience /judgment.

KNOWLEDGE OF STATIC EQUIPMENT

In-depth Understanding of rotating equipment used generally in oil and gas / refinery / industries for onshore and offshore applications, and select correct types of equipment for a given process service application

In-depth Understanding and engineering competence in hydraulics, thermodynamics, aerodynamics, rotor-dynamics, combustion etc.

Able to predict rotating equipment performance without over dependence on Vendor

Competent to review Vendor’s various options (including limitation and /or deviation) and provide detailed technical evaluation (TBE/TBT) of the equipment.

Competent to review in-house and Vendor’s P&IDs and identify interfaces for the equipment

Competent to witness the Vendor FAT / shop testing, and review test reports and provide relevant comments if any

Competent to participate effectively to resolve any issues related to equipment testing in case of failures / deficiencies /under-performance /discrepancy during shop testing.

Competent to provide support by responding to Site Technical Queries (STQ) regarding equipment engineering design /equipment installation / mechanical completion for field acceptance

Competent to explore cost-saving options / energy efficient measures during project execution phase or during proposal, if requested, and if available

Competent to actively involved in the equipment / project HAZOP and close out of any action points

MATERIAL SELECTION

Understanding of various types of materials to be used for different services (Wet CO2 service, sour service, low-temperature service, toxic service, etc) and knowledge of material available in the market for the particular service and equipment, and review of Vendor proposes material.

Understanding of materials grades to be used based on process’s input / material selection report / corrosion study, and provide feedback if necessary, in-case of the material selected are in questions.

WORKING DELIVERABLES

Able to prepare effectively in a timely and productive manner

Calculation Spreadsheets

Technical Data Sheet

Job specification / Equipment specification

Material Requisition (MR/SR)

Technical Clarification

Technical Bid Evaluation / Tabulation (TBE/TBT)

Equipment selection study reports

Input to other disciplines’ deliverables such as layout and utility requirements

Weight data and foundation loading input

Equipment interface details

Equipment list input

Compressor aero / thermodynamics studies and summary

Driver selection and de-rate

Equipment selection study report

VENDOR DATA REVIEW (VDR)

Expert review on Vendor Data Review to meet Codes and Standards, Local Regulations, project and disciplines requirements

Competent to interface with other disciplines like piping /stress group, process, civil, electrical, structural and instrumentation

Able to understand interface issues with other disciplines, and resolve any conflict

Able to conduct VDR meeting with vendor /support Vendor in case of needs to shorten the VDR duration and to achieve project progress.

FABRICATION KNOWLEDGE

Understand fabrication process, critical element/ critical path and how its influence the delivery of equipment

Able to anticipant effectively to improve delivery schedule of Vendor equipment

PERFORM AS LEAD ENGINEER ROLE

Once assigned as a Lead Engineer, able to provide total commitment to meet project values, monitoring of progress for achieve delivery objective, and execute within appropriate resources

To provide pro-activeness, creativity and efficiency in project execution

Coordinate and plan resources for execution of project.

TECHNICAL AUDITS

Ability to carry out technical audits at the Department Manager request (For Senior Engineer more than 10 years experience)

Able to effectively investigate and resolve any quality complaints or incidents raised by any interested parties, or when requested by Client, or project manager.

OTHERS

Good professional judgment, responsive and pro-active in execution of static equipment deliverables to meet project needs, and ability to handle difficult situations arise due to complexities of Project demand

Produce quality engineering deliverables / service and meeting JV/ Client expectation

Fulfill QA /HSE aspects, with acceptable team-works

Able to supervise, coach and guide young Engineers

About you:

We love to hear from you and how you match with this position. To be successful in this mission you should consider the following requirements:

Catch this opportunity and invest in your skills development, should your profile meet these requirements.

The Candidate shall possess a Degree in Mechanical Engineering (B.E. Hons). Possess at least minimum 7 years of engineering design experiences in various static equipment for onshore / offshore application, preferably with experiences in Green Hydrogen, Electrolyzer and Carbon Capture Storage Projects.

Additional Information

Be willing to travel and stationed at various Engineering Operating Centers / Client Office on needs basis (for overseas assignment)
Site or fabrication experiences (1 to 2 years)
Exhibit and maintain good relationship with Client / Peers / Equipment Vendor & suppliers.
Good Professional Check (feedback) from past Employers / Clients.

Your career with us

Working at Technip Energies is an inspiring journey, filled with groundbreaking projects and dynamic collaborations. Surrounded by diverse and talented individuals, you will feel welcomed, respected, and engaged. Enjoy a safe, caring environment where you can spark new ideas, reimagine the future, and lead change. As your career grows, you will benefit from learning opportunities at T.EN University, such as The Future Ready Program, Graduate Program, and from the support of your manager through check-in moments like the Mid-Year Development Review, fostering continuous growth and development.

What’s Next?

Once receiving your system application, our recruiting team will screen and match your skills, experience, and potential team fit against the role requirements. We ask for your patience as the team completes the volume of applications with reasonable timeframe. Check your application progress periodically via personal account from created candidate profile during your application.

We invite you to get to know more about our company by visiting www.ten.com and follow us on LinkedIn, Instagram, Facebook, X and YouTubefor company updates.

#LI-MK1

About the Company

Technip Energies

Engineering and technology solutions for energy

Technip Energies provides engineering, technology, and construction solutions for the energy industry, with two segments: Projects Delivery (engineering, procurement, and construction of onshore and offshore facilities) and Technology, Products and Services (proprietary technologies, equipment, and consulting). It serves oil and gas, petrochemical, and other industrial clients worldwide, delivering technologies, products, and services alongside large-scale projects. The company differentiates itself by an integrated, end-to-end approach that blends technology development with project delivery, a portfolio of proprietary technologies, and a global footprint across Europe, the Americas, Asia-Pacific, and the Middle East & Africa, with emphasis on energy transition topics like LNG, hydrogen, and carbon capture. Its goal is to help customers meet energy needs and transition objectives by providing practical, scalable engineering and technology solutions for complex energy projects.

Company size: 10,001+
Company stage: IPO
Headquarters: Paris, France
Founded: Not listed

Recently Posted Jobs

Explore more opportunities at Technip Energies

See more jobs