P

Princeton Plasma Physics Laboratory

National fusion energy research and education

Senior Building Operator - Heating, Ventilation, and Air Conditioning

HVAC & Building SystemsUpdated on Nov 17
Full-timePrinceton, NJ, USA$73k - $109.4kIn-person

About the Job

Requirements

  • A high school diploma or equivalent is required.
  • Completion of a recognized HVAC/R, stationary-engineering, operating-engineer, mechanical, or apprenticeship/technical program is required.
  • A valid driver's license is required.
  • At least eight years of progressively responsible experience operating, maintaining, and troubleshooting complex commercial, institutional, industrial, pharmaceutical, laboratory, research, or mission-critical facilities is required.
  • Demonstrated experience coordinating multi-trade technical work and providing operational leadership during maintenance, outages, abnormal conditions, or emergency response is required.
  • Working knowledge of refrigeration, chilled-water and heating-water systems, pumps, variable-frequency drives, heat exchangers, air-handling and exhaust systems, geothermal or ground-source HVAC principles, controls, water systems, and mechanical infrastructure is required.
  • Ability to interpret operation and maintenance manuals, mechanical drawings, piping and instrumentation diagrams, electrical and control schematics, sequences of operation, equipment submittals, commissioning reports, and maintenance history is required.
  • Experience using a computerized maintenance management system and standard office applications to document work, analyze trends, manage priorities, and communicate status is required.
  • Strong troubleshooting, analytical, and decision-making skills to evaluate interacting mechanical, electrical, controls, environmental, and process conditions are required.
  • Advanced understanding of heat transfer, refrigeration cycles, geothermal and ground-source heat exchange, hydronic distribution, air systems, and energy-recovery principles is required.
  • Ability to use hand and power tools, electrical test instruments, temperature, pressure, airflow, vibration, and water-side instruments, and manufacturer service software within assigned qualifications is required.
  • Clear written and verbal communication and ability to prepare concise technical updates, work documentation, procedures, and recommendations are required.
  • Ability to manage multiple priorities while collaborating across operations, engineering, research, environmental safety and health, and vendor teams is required.
  • Commitment to safety, quality, configuration control, customer service, and operational excellence is required.
  • EPA Section 608 Universal certification and A2L Refrigerant certification are required.
  • Ability to walk, stand, climb, bend, kneel, work in equipment spaces, use hand and power tools, wear required personal protective equipment, and lift or move materials within PPPL-established limits is required.
  • Ability to respond outside normal working hours for alarms, outages, leaks, equipment failures, severe weather, or critical research support may be required.

Responsibilities

  • Operate, monitor, inspect, maintain, and troubleshoot mission-critical mechanical, utility, and control systems to support facility uptime, occupant safety, environmental control, and research continuity.
  • Serve as the first senior technical escalation point for abnormal conditions, alarms, loss of capacity, leaks, temperature or humidity excursions, utility interruptions, and equipment failures.
  • Conduct and coordinate building systems inspections, reviewing temperatures, pressures, flows, differential pressures, vibration, noise, equipment status, alarms, water conditions, housekeeping, and visible deficiencies.
  • Verify field conditions, establish safe interim controls, perform or coordinate authorized repairs and adjustments, and initiate follow-up work orders for unresolved conditions.
  • Respond to equipment failures, severe weather, and other emergencies in accordance with PPPL procedures and assigned incident-response responsibilities.
  • Operate and maintain central and distributed HVAC systems, including water-cooled and air-cooled chillers, packaged direct-expansion equipment, heat exchangers, air-handling units, energy-recovery systems, pumps, fan coils, fan-powered boxes, chilled beams, air terminal units, hydronic coils, variable-frequency drives, valves, dampers, and associated air-distribution components.
  • Monitor and adjust mechanical and control equipment valves, thermostats, diffusers, safeties, and operating setpoints to maintain approved environmental and equipment conditions; review temperature, humidity, pressure, and other building-automation-system points to determine facility response.
  • Diagnose refrigeration, airflow, hydronic, mechanical, electrical-control, and sequence-related problems, and determine appropriate equipment repair scope before corrective work is assigned.
  • Support cooling and heating optimization, equipment staging, differential-pressure control, energy-recovery performance, water-side balance, seasonal changeover, electrical load-shed procedures, and reliable fallback operation.
  • Operate and maintain site high-pressure and low-pressure steam and associated steam-condensate systems, including condensate receiver units, steam traps, steam valves, and pressure-reducing and safety-relief valves; act as the primary point person for restarting the system from cold conditions.
  • Operate, monitor, maintain, and troubleshoot the Princeton Plasma Innovation Center geothermal ground loop, source-water and heat-transfer systems, associated pumps, distribution piping and components, and modular chiller arrays.
  • Evaluate entering and leaving water temperatures, flows, pressures, pump and variable-frequency-drive performance, heat-transfer effectiveness, energy trends, and seasonal ground-loop behavior against design and commissioning baselines.
  • Identify and escalate system deficiencies and changes in long-term ground-loop performance.
  • Participate in mechanical-system commissioning efforts at the Princeton Plasma Innovation Center.
  • Perform, coordinate, and verify preventive and corrective maintenance in accordance with PPPL procedures, manufacturer recommendations, approved job plans, warranty requirements, and applicable industry practices.
  • Perform maintenance such as filter replacement; coil and condensate-system cleaning; strainer service; approved heat-exchanger cleaning; motor and bearing lubrication and replacement; belt inspection and adjustment; pulley and shaft alignment; valve and actuator inspection; leak checks; and scheduled equipment inspections.
  • Review maintenance history, operating data, alarms, trends, and repeat failures to identify reliability risks, deferred deficiencies, spare-parts requirements, and opportunities for predictive or condition-based maintenance.
  • Support development and continuous improvement of preventive-maintenance job plans, operating inspections, standard readings, seasonal-readiness plans, troubleshooting guides, shutdown and startup checklists, and critical-spares lists.
  • Monitor building automation and energy-management systems; review alarms, trends, schedules, setpoints, overrides, equipment commands, feedback, and utility performance.
  • Partner with building-automation-system personnel to validate sequences of operation, diagnose unstable control loops, confirm sensor and actuator performance, and resolve mechanical-control interactions.
  • Track and trend system performance using building automation, metering, commissioning data, and computerized-maintenance-management-system history to improve energy efficiency, reliability, and operating stability without compromising research requirements.
  • Support approved system improvements, retro-commissioning, and optimization through data analysis, field verification, functional testing, and documented change control.
  • Ensure work is planned and executed safely and in accordance with Department of Energy, PPPL, Occupational Safety and Health Administration, environmental, quality-assurance, configuration-management, cybersecurity, and site work-control requirements applicable to the assignment.
  • Verify permits, lockout/tagout boundaries, procedures, drawings, hazards, personal protective equipment, access requirements, tools, parts, and restoration steps are established before work begins.
  • Support inspections, audits, risk assessments, and corrective-action activities by providing accurate technical documentation and subject-matter input.
  • Identify commissioning, design, construction, maintainability, or warranty deficiencies; preserve evidence and route issues to the responsible contractor, designer, commissioning agent, manufacturer, or PPPL authority.
  • Complete all required PPPL safety, qualification, and refresher training and maintain orderly, clean, and safe work areas.
  • Provide technical guidance and operational leadership to technicians during routine operations, maintenance, shutdowns, and incident response, and mentor personnel within assigned authority.
  • Coordinate work among HVAC, building automation, electrical, plumbing, operations, engineering, planners, researchers, commissioning agents, contractors, and original-equipment-manufacturer service providers.
  • Support weekly planning and scheduling by identifying priority, labor, permits, parts, outage windows, research impacts, vendor dependencies, and restoration requirements.
  • Use Planon or the designated computerized maintenance management system to maintain accurate work orders, asset history, readings, labor, parts, inspections, deficiencies, warranty records, procedures, and status updates.
  • Communicate equipment status, operational risk, planned outages, unresolved deficiencies, and recommended actions clearly to Facilities leadership and affected stakeholders.
  • Perform other duties as assigned.

Desired Qualifications

  • An applicable New Jersey refrigeration operator, stationary engineer, or operating engineer license appropriate to assigned duties is preferred.
  • Advanced training or hands-on experience with geothermal well fields, ground-source heat-pump or source-water systems, energy recovery, modular chillers, centrifugal chillers, laboratory ventilation, or complex hydronic systems is preferred.
  • Experience with Siemens Desigo CC or Automated Logic WebCTRL, BACnet, variable-frequency drives, packaged equipment controls, utility metering, and energy-performance analysis is preferred.
  • Experience in a Department of Energy or national laboratory, good manufacturing practice or pharmaceutical, healthcare, higher-education, data-center, or other highly regulated or mission-critical environment is preferred.

About the Company

Princeton Plasma Physics Laboratory

National fusion energy research and education

PPPL advances fusion energy research and plasma physics as a national center under the U.S. Department of Energy. It collaborates with researchers to develop scientific understanding and key innovations needed to make fusion a practical energy source. The lab also emphasizes high-quality scientific education. Its approach focuses on building the knowledge base and technologies for a safe, economical, and environmentally attractive fusion energy future for the world. PPPL differs from competitors by being a government-supported national laboratory with a broad collaboration network, combining fundamental research with education and a direct mission to enable fusion as a scalable energy solution, rather than competing as a commercial product provider.

Company size
501-1,000
Company stage
Not listed
Total funding
Not listed
Headquarters
Princeton, NJ
Founded
1961

Recently Posted Jobs

Explore more opportunities at Princeton Plasma Physics Laboratory

See more jobs