Threat Tec

Live threat emulation, wargaming, simulations

General Shop Technician

Equipment MaintenanceConfirmed live in the last 24 hours

Full-timeHampton, VA, USA$50k - $70k /yrIn-person

About the Job

Requirements

A high school diploma or GED is required.
Previous hands-on experience working in a machine shop, mechanical repair facility, fabrication shop, maintenance environment, construction trade, or similar technical setting is required.
General knowledge of mechanical systems, tools, equipment, and shop practices is required.
Practical experience using hand tools, power tools, measuring instruments, and common shop equipment is required.
Basic carpentry skills, including measuring, cutting, assembling, and installing materials, are required.
Ability to perform general mechanical assembly, maintenance, and repair tasks is required.
Basic understanding of shop safety procedures and proper equipment operation is required.
Ability to follow verbal and written instructions and work independently or as part of a team is required.
Strong mechanical aptitude, problem-solving skills, and attention to detail are required.
Willingness to perform a variety of tasks and assist wherever needed within the shop is required.
Ability to stand, walk, bend, kneel, and work in a shop environment for extended periods is required.
Ability to lift and move materials, tools, and equipment weighing up to 50 pounds, with assistance when appropriate, is required.
Ability to safely operate hand tools, power tools, and shop machinery is required.
Ability to work in an environment where noise, dust, and other typical machine shop conditions may be present is required.
Ability to wear required personal protective equipment is required.

Responsibilities

Perform general mechanical work, including assembly, installation, maintenance, troubleshooting, and repair of mechanical components and equipment.
Assist machinists and engineering personnel with fabrication, modification, assembly, and repair of parts, equipment, and systems.
Perform general carpentry tasks, including measuring, cutting, drilling, fastening, assembling, and modifying wooden structures and components.
Operate common hand tools, power tools, and general shop equipment safely and effectively.
Assist with basic metal fabrication, grinding, drilling, cutting, sanding, and finishing operations.
Support the assembly and integration of mechanical systems, prototypes, and custom-engineered equipment.
Perform routine maintenance and minor repairs on shop equipment, tools, and machinery.
Read and interpret basic technical drawings, diagrams, measurements, and assembly instructions.
Assist with material handling, inventory organization, equipment movement, and shop setup.
Maintain a clean, organized, and safe working environment.
Identify mechanical issues and assist in developing practical solutions.
Work collaboratively with machinists, technicians, engineers, and other shop personnel to complete assigned projects.
Perform additional general shop duties as required to support Mission Engineering.

Desired Qualifications

Two or more years of experience in a machine shop, fabrication shop, mechanical maintenance, or related hands-on trade.
Experience working alongside machinists, welders, fabricators, or mechanical engineers.
Familiarity with drill presses, band saws, grinders, sanders, and other common machine shop equipment.
Experience with basic metalworking, fabrication, or welding support.
Experience assembling mechanical equipment, fixtures, prototypes, or custom-built systems.
Basic understanding of mechanical drawings, blueprints, and dimensional measurements.
Previous experience in a defense contracting, manufacturing, engineering, or military maintenance environment.
Experience operating forklifts, pallet jacks, or other material-handling equipment.

Salary Range: 50000 to 70000 (Currency: USD) (Pay period: per-year-salary)

Threat Tec, LLC is an integrated technology and services company serving defense and commercial customers. We design, deliver, and sustain training, readiness, and mission-support solutions that combine people, process, and technology to improve preparation, decision-making, and operational performance.

Position Overview

Threat Tec, LLC is seeking a dependable, mechanically inclined General Shop Technician to support operations within our Mission Engineering Division. The ideal candidate will have a broad range of hands-on mechanical skills, general machine shop knowledge, carpentry experience, and the ability to assist with fabrication, assembly, maintenance, and repair projects.

This position is ideal for a versatile, hardworking individual who enjoys working with their hands, solving mechanical problems, and supporting a variety of technical and engineering projects. Candidates should be comfortable working in a fast-paced shop environment, utilizing hand and power tools, and assisting skilled machinists, mechanics, and engineering personnel.

Key Responsibilities

Perform general mechanical work, including assembly, installation, maintenance, troubleshooting, and repair of mechanical components and equipment.

Assist machinists and engineering personnel with fabrication, modification, assembly, and repair of parts, equipment, and systems.

Perform general carpentry tasks, including measuring, cutting, drilling, fastening, assembling, and modifying wooden structures and components.

Operate common hand tools, power tools, and general shop equipment safely and effectively.

Assist with basic metal fabrication, grinding, drilling, cutting, sanding, and finishing operations.

Support the assembly and integration of mechanical systems, prototypes, and custom-engineered equipment.

Perform routine maintenance and minor repairs on shop equipment, tools, and machinery.

Read and interpret basic technical drawings, diagrams, measurements, and assembly instructions.

Assist with material handling, inventory organization, equipment movement, and shop setup.

Maintain a clean, organized, and safe working environment.

Identify mechanical issues and assist in developing practical solutions.

Work collaboratively with machinists, technicians, engineers, and other shop personnel to complete assigned projects.

Perform additional general shop duties as required to support Mission Engineering

Required Qualifications

High school diploma or GED required.

Previous hands-on experience working in a machine shop, mechanical repair facility, fabrication shop, maintenance environment, construction trade, or similar technical setting.

General knowledge of mechanical systems, tools, equipment, and shop practices.

Practical experience using hand tools, power tools, measuring instruments, and common shop equipment.

Basic carpentry skills, including measuring, cutting, assembling, and installing materials.

Ability to perform general mechanical assembly, maintenance, and repair tasks.

Basic understanding of shop safety procedures and proper equipment operation.

Ability to follow verbal and written instructions and work independently or as part of a team.

Strong mechanical aptitude, problem-solving skills, and attention to detail.

Willingness to perform a variety of tasks and assist wherever needed within the shop.

Preferred Qualifications

2+ years of experience in a machine shop, fabrication shop, mechanical maintenance, or related hands-on trade.

Experience working alongside machinists, welders, fabricators, or mechanical engineers.

Familiarity with drill presses, band saws, grinders, sanders, and other common machine shop equipment.

Experience with basic metalworking, fabrication, or welding support.

Experience assembling mechanical equipment, fixtures, prototypes, or custom-built systems.

Basic understanding of mechanical drawings, blueprints, and dimensional measurements.

Previous experience in a defense contracting, manufacturing, engineering, or military maintenance environment.

Experience operating forklifts, pallet jacks, or other material-handling equipment.

Physical Requirements

Ability to stand, walk, bend, kneel, and work in a shop environment for extended periods.

Ability to lift and move materials, tools, and equipment weighing up to 50 pounds, with assistance when appropriate.

Ability to safely operate hand tools, power tools, and shop machinery.

Ability to work in an environment where noise, dust, and other typical machine shop conditions may be present.

Ability to wear required personal protective equipment (PPE).

Ideal Candidate

We are looking for a hands-on, mechanically capable individual who can wear multiple hats in a busy shop environment. The successful candidate does not need to be a master machinist or specialized engineer but should possess a solid foundation in mechanical work, carpentry, general fabrication, and shop operations.

Someone who has worked as a mechanic, maintenance technician, fabrication assistant, carpenter, or experienced general shop hand and enjoys tackling different projects would be an excellent fit.

Nothing in this job description restricts management’s right to assign or reassign duties and responsibilities to this job at any time. This description reflects management’s assignment of essential functions; it does not proscribe or restrict the tasks that may be assigned. This job description is subject to change at any time.

Threat Tec, LLC is an Equal Employment Opportunity/Affirmative Action Employers (EEO/AA). All employment and hiring decisions are based on qualifications, merit, and business needs without regard to race, religion, color, sexual orientation, nationality, gender, ethnic origin, disability, age, sex, gender identity, veteran status, marital status, or any other characteristic protected by applicable law.

If you are a qualified individual with a disability and/or a disabled veteran, you may request a reasonable accommodation if you are unable or limited in your ability to access job openings or apply for a job on this site as a result of your disability. You can request assistance by contacting [email protected] or calling 757-240-4305.

#TT

About the Company

Threat Tec

Live threat emulation, wargaming, simulations

Threat Tec provides live threat emulation, wargaming scenarios, and realistic simulations to help U.S. and allied clients stay ahead of evolving threats. Its offerings include dynamic depictions of perceived threats and tailored threat-informed exercises designed to test leadership, plans, and decision-making under pressure. The company differentiates itself through a team of experts who combine specialized knowledge across security domains with hands-on execution to deliver customized, credible simulations and insights rather than generic security advice. The goal is to help clients prepare, anticipate, and respond to the most critical challenges in a complex global threat landscape, maintaining a strategic edge and higher confidence in security decisions.

Company size: 51-200
Company stage: Not listed
Total funding: Not listed
Headquarters: Hampton, VA
Founded: 2012

Recently Posted Jobs

Explore more opportunities at Threat Tec

See more jobs