Full-Time

Staff Hardware Design Engineer

ADAS Compute

Updated on 3/14/2025

General Motors

General Motors

10,001+ employees

Designs, manufactures, and sells vehicles

No salary listed

Senior, Expert

Company Historically Provides H1B Sponsorship

Warren, MI, USA

The successful candidate is expected to report to the Warren Tech Center three times per week, at minimum.

Category
Automotive Electrical Engineering
Embedded Systems Engineering
Electrical Engineering
Required Skills
PSpice
Requirements
  • Bachelors degree (or higher) in Electrical, Computer Engineering or related discipline.
  • 10+ years of experience in electronic hardware design, with a strong focus on ADAS hardware design and automotive hardware electronics design.
  • Proven ability of successfully launching ADAS Compute build-to-print hardware into production.
  • Extensive experience in designing ADAS Compute hardware and components, such as SoCs, MCUs, PCIe, DDR, UFS, eMMC, GMSL, FPD-Link, Ethernet Switches, PHY, CAN, power supply design, etc.
  • Strong proficiency in circuit design, schematic creation, PCB layout, signal integrity and power integrity, and power management.
  • Experience in design & analysis tools like: Mentor Graphics (schematic & layout), Ansys (signal integrity), Simplis (power integrity), Altair (EMC), Mathcad, PSpice & Saber
  • In-depth knowledge of requirements engineering process (FMEA, Preliminary Hazard Analyses).
  • In-depth knowledge of verification and validation processes.
  • In-depth knowledge of embedded software development, testing and associated tools.
  • Understanding of hardware design and failure mode.
  • Thorough knowledge of design development and test engineering, manufacturing and assembly operations, engineering processes and procedures.
  • Knowledge of automotive industry standards (ISO 26262, ASIL) and safety-critical design principles.
  • Experience with system-level integration, including interfacing with sensors, processors, and communication protocols.
  • Experience with design for manufacturing (DFM), design for assembly (DFA), and design for testing (DFT).
Responsibilities
  • Lead the architecture and design of ADAS Compute electrical hardware: from SoC/key component selection, schematic capture, worst case analysis, PCB layout, bring-up, debug, signal integrity and power integrity (SI/PI), design verification test (environmental and EMC), to manufacturing support and production launch.
  • Drive the design and development of the ADAS Compute hardware platform (from concept design to launch) while meeting cost, timing, quality, and safety targets.
  • Oversee and guide a team of electrical hardware designers - providing technical direction, assigning tasks, and ensuring the team's productivity and efficiency.
  • Collaborate with cross-functional teams, such as software, mechanical, and manufacturing, to ensure seamless integration of the electrical design of the ADAS Compute hardware.
  • Work closely with contract manufacturing partners to ensure successful product build, from prototype through to mass production, while maintaining quality, cost, and timing targets.
  • Lead electrical schematic design and PCB layout.
  • Lead new IC design/development strategic to new ADAS Compute designs and architectures.
  • Perform/support detailed hardware analysis – worst case analysis, signal integrity, power integrity, etc.
  • Lead bring-up of hardware design from power supplies, SoCs, MCUs, SerDes interfaces, network devices, etc.
  • Lead design for manufacturing (DFM), design for assembly (DFA), and design for testing (DFT).
  • Drive the validation and testing of hardware components and systems, ensuring high levels of reliability and performance.
  • Establish and oversee test plans and protocols to validate designs against requirements.
  • Lead activities to analyze test results troubleshoot hardware issues, perform root cause analysis, and develop solution to resolve design problems.
  • Support manufacturing partners in troubleshooting and resolving any production-related issues that arise during the manufacturing process.
  • Conduct design reviews and provide constructive feedback to ensure optimal solutions.
  • Lead/support DFMEA/PFMEA of ADAS Compute; ensure lessons learned and best practices are included.
  • Mentor and provide technical leadership to hardware engineers, offering guidance in hardware design best practices and troubleshooting.

General Motors designs, manufactures, and sells vehicles and vehicle parts, catering to individual consumers, businesses, and government entities. The company generates revenue through vehicle sales under brands like Chevrolet and Cadillac, as well as financing services via GM Financial. GM distinguishes itself from competitors with its commitment to sustainability, community service, and diversity, having women make up 55% of its Board of Directors. The company's goal is to balance traditional automotive manufacturing with advancements in electric vehicles and autonomous driving technologies.

Company Size

10,001+

Company Stage

IPO

Headquarters

Detroit, Michigan

Founded

1908

Simplify Jobs

Simplify's Take

What believers are saying

  • AI integration could advance vehicle technology and operational efficiencies.
  • Dolby Atmos in Cadillac EVs enhances in-car entertainment, attracting tech-savvy consumers.
  • USMCA participation helps maintain competitive pricing and supply chain stability.

What critics are saying

  • Dolby Atmos integration may increase production costs, affecting profit margins.
  • Formula 1 entry could divert resources from core operations, posing financial risks.
  • Tariff exemptions are temporary, leading to future cost uncertainties if reinstated.

What makes General Motors unique

  • GM's Dynamic Fuel Management system enhances fuel efficiency in traditional vehicles.
  • Cadillac's Formula 1 entry boosts GM's brand visibility and technological innovation.
  • Chevrolet Vintage taps into the growing market for vintage car enthusiasts.

Help us improve and share your feedback! Did you find this helpful?

Benefits

Paid Vacation

Paid Sick Leave

Paid Holidays

Parental Leave

Health Insurance

Dental Insurance

Vision Insurance

Life Insurance

401(k) Company Match

401(k) Retirement Plan

Tuition Reimbursement

Student Loan Assistance

Flexible Work Hours

Discount on GM vehicles

Company News

PR Newswire
Mar 10th, 2025
Dolby And General Motors Bring Dolby Atmos To Cadillac'S Entire 2026 Ev Lineup

SAN FRANCISCO and DETROIT, March 10, 2025 /PRNewswire/ -- Dolby Laboratories, Inc. (NYSE: DLB), a leader in immersive entertainment experiences, and General Motors (NYSE: GM) today announced that Dolby Atmos will be supported as an available feature across Cadillac's entire 2026 electric vehicle lineup. This will include the 2026 ESCALADE IQL, ESCALADE IQ, LYRIQ-V, OPTIQ, VISTIQ, and more. Select 2025 models will also receive Dolby Atmos through over the air software updates

PR Newswire
Mar 7th, 2025
Twg Motorsports And Gm Receive Formal Approval For Cadillac Formula 1™ Team

INDIANAPOLIS and SILVERSTONE, England, March 7, 2025 /PRNewswire/ -- It's official: the Cadillac Formula 1 Team has received final approval to join the pinnacle of motorsport. Backed by TWG Motorsports and General Motors (GM), the team will join the FIA Formula One World Championship grid in March 2026.Today, the FIA and Formula 1 announced that the Cadillac Formula 1 Team has met their requirements to join the existing 10 teams starting next year

PYMNTS
Mar 5th, 2025
White House Announces 1-Month Delay Of Tariffs On Cars From Canada And Mexico

Cars from Canada and Mexico imported into the United States through the U.S.-Mexico-Canada Agreement (USMCA) will be exempted for one month from the tariffs imposed on the countries Tuesday (March 4). The move by the White House followed a request from three automakers — Ford Motor, General Motors and Stellantis — but will apply to all cars that comply with the USMCA, The Wall Street Journal reported Wednesday (March 5). The three automakers will work with the White House “on our shared goals of increasing U.S. automotive production and expanding exports,” said the American Automotive Policy Council, a group that represents the companies, per the report

PR Newswire
Mar 4th, 2025
Twg Global Launches Twg Motorsports With Brands Across F1, Indycar, Nascar And Imsa

TWG Motorsports to champion the world's most high performing racing teamsINDIANAPOLIS, Feb. 25, 2025 /PRNewswire/ -- TWG Global today announces the launch of TWG Motorsports, a new division created to bring together a portfolio of leading motorsports organizations to drive competitive excellence, ingenuity and commercial innovation across the globe, with the aim of challenging at the very top of the sport.Established in late 2024 by TWG Global co-chairs Mark Walter and Thomas Tull, TWG Motorsports is focused on setting a new standard for racing. Their commitment to driving innovation by utilizing next-generation technologies and leveraging synergies continues a history of commitment to sports as evidenced by a TWG Global sports portfolio that includes the Los Angeles Dodgers, Chelsea Football Club, Professional Women's Hockey League and stakes in the Los Angeles Lakers and other ventures. TWG Motorsports will apply the same transformative growth mindset to racing.Longtime Mark Walter partner Dan Towriss will lead TWG Motorsports as CEO. "Dan has been instrumental in forming the landmark Cadillac Formula 1 team in partnership with General Motors and acquiring for TWG Global a broad racing portfolio that includes Andretti Global, Wayne Taylor Racing, and Spire Motorsports," Walter said."We're excited to see these teams united under the TWG Motorsports umbrella and Dan's leadership,'' Tull added. Towriss also serves as CEO of Group 1001 Insurance, a U.S

Reporteros del Sur
Mar 3rd, 2025
Meet the Trailblazer Steering General Motors' AI-Fueled Future

General Motors has appointed Barak Turovsky as its first chief of artificial intelligence, marking a significant step into AI integration in the automotive industry.