Technip Energies

Engineering and technology solutions for energy

Senior Piping Designer

Design EngineeringConfirmed live in the last 24 hours

Full-timeKuala Lumpur, Federal Territory of Kuala Lumpur, MalaysiaNo salary listedIn-person

About the Job

Requirements

A recognized diploma in Mechanical Engineering or equivalent is required.
At least 10 years of working experience in the Oil & Gas and petrochemical fields, especially in EPC projects, is required.
Proficiency in Aveva E3D or Intergraph SP3D is required.
Technical knowledge of piping engineering and piping design requirements is required.
Working experience in brownfield projects is required.
A team-leader disposition is required.

Responsibilities

Prepare 3D models and perform piping studies for all equipment using current equipment vendor data, equipment layouts, equipment lists, plot plans, and other required inputs.
Ensure equipment designs conform to project specifications and requirements for accessibility, operability, and maintainability, including nozzle orientation, equipment elevations and orientation, ladders, service platforms, PSV lines, and fire-water networks for hydrants, monitors, and deluge valves.
Coordinate with the Mechanical Equipment Engineer to ensure vendor data are available for all equipment and identify missing data.
Perform pipe-routing studies and model all lines.
Ensure designs conform to P&IDs and line lists, incorporating process requirements such as slope, free flow, and avoidance of pockets.
Ensure designs conform to JSD for Piping Design, Workplace Design Specification, and Working Instruction.
Incorporate stress calculation notes into piping designs.
Account for pipe spacing, insulation thickness, guides, stoppers, and flexibility for stress-line categories 1, 2, and 3.
Provide adequate operation and maintenance space, including ladders, stairs, and service platforms for valves, flanges, joints, and instruments.
Study and identify pipe-support locations and spans, propose support locations, and prepare pipe-support attachments for issuance to the stress team.
Reserve modeled space for equipment removal.
Transfer changes and markups from personal copies to master copies of P&IDs, equipment layouts, and other documents.
Accurately complete all model attributes and validate line attributes only when the maturity level is acceptable.
Seek advice from the Piping Lead, Piping Checker, or Area/Module/Unit Lead when piping design concerns arise.
Coordinate with other disciplines, including E&I and structural, to ensure 3D models are clash-free.
Model standard piping supports in the 3D model.
Prepare plot plans or equipment layouts for offshore, onshore, and floater projects.
Supervise a pool of piping designers and perform piping design checks.
Perform 3D modeling of equipment and piping.
Conduct internal model reviews with team members.
Design pipe supports and prepare drawings.
Perform site visits as required.
Understand P&ID requirements.

Be part of the solution at Technip Energies and embark on a one-of-a-kind journey. You will be helping to develop cutting-edge solutions to solve real-world energy problems.

We are currently seeking a Senior Designer – Piping to join our team based in Kuala Lumpur.

Successful candidates will be offered Fixed Term Contract.

About us:

Technip Energies is a global technology and engineering powerhouse. With leadership positions in LNG, hydrogen, ethylene, sustainable chemistry, and CO2 management, we are contributing to the development of critical markets such as energy, energy derivatives, decarbonization, and circularity. Our complementary business segments, Technology, Products and Services (TPS) and Project Delivery, turn innovation into scalable and industrial reality.

Through collaboration and excellence in execution, our 17,000+ employees across 34 countries are fully committed to bridging prosperity with sustainability for a world designed to last.

Main Challenges

Senior Piping Designer shall design, route and consider the equipment and piping design modeled to meet the objectives and is accordance with the relevant document requirements.

His responsibilities shall include but not limited to the following:

Prepare 3D model and perform piping study for all equipment, based on the followings:
Make sure latest inputs of Equipment Vendor Data, Equipment Layouts, Equipment List, Plot Plans, and etc is implemented.
Maintain conformity with Project Specifications and Requirements, and with respect to accessibility, operability and maintainability of equipment’s e.g nozzle orientation, equipment elevations, orientation and adequacy of ladders, service platforms, PSV lines, outlet fire water network for hydrants, monitors and deluge valves and etc.
Coordinate closely with Mechanical Equipment Engineer to ensure that the vendor data are available for all equipment and highlight any missing data for equipment to the Mechanical Equipment Engineer.
Perform pipe routing study and modeling of all lines.
Maintain conformity to P&ID and Line List, Designer shall ensure that specific process requirements such as slope, free flow and no pockets etc. are incorporated.
Maintain conformity with JSD for Piping Design, Workplace Design Specification and Working Instruction.
Perform incorporation of Stress Calculation Notes into his Piping Design.
Consider for Pipe Spacing (insulation thickness, guide and stopper). Consider on pipe flexibility for stress lines category 1, 2 and 3.
Prepare adequate operation and maintenance space such as ladders, stairs and service platforms and etc for valves, flanges, joints and instruments.
Perform study, identify and propose pipe support locations, span. Then, prepare pipe support attachments for issuance to Stress team.
Prepare reserve volume for equipment removable space model.
Transfer all changes and mark-up from personal copy onto the Piping Master Copy (P&ID, Equipment layouts and etc.).
Responsible to correctly fill in all the model attributes.
Line attributes to be validated only if the level of maturity is acceptable.
Solicit advice from either Piping Lead or Piping Checker or Area/Module/Unit Lead if there is any Piping Design Concerns.
Ensure 3D Models designed are clash free via coordination with various disciplines such as E&I, Structural and etc.
Model Piping Standard Support in 3D Model.

Main Accountabilities:

To do plot plan or equipment layout for offshore ,onshore projects and floater project.
Supervise pool of piping designers and do piping design check.
To do 3D modelling of equipment and piping
Perform internal model review with the team members.
To do pipe support design and drawings
Perform site visit as required.
Able to understand the PI&D requirement.

About you:

Min. recognized Diploma in Mechanical Engineering or equivalent.
At least 10 years of working experience in Oil & Gas and Petrochemical field (Especially in EPC projects)
Well versed to operate Aveva E3D or Intergraph SP3D
Technical sound in Piping Engineering and Piping Design requirement.
Good character as a team leader.
Working experience in brownfield project.

Your career with us

Working at Technip Energies is an inspiring journey, filled with groundbreaking projects and dynamic collaborations. Surrounded by diverse and talented individuals, you will feel welcomed, respected, and engaged. Enjoy a safe, caring environment where you can spark new ideas, reimagine the future, and lead change. As your career grows, you will benefit from learning opportunities at T.EN University, such as The Future Ready Program, Graduate Program, and from the support of your manager through check-in moments like the Mid-Year Development Review, fostering continuous growth and development.

What’s Next?

Once receiving your system application, our recruiting team will screen and match your skills, experience, and potential team fit against the role requirements. We ask for your patience as the team completes the volume of applications with reasonable timeframe. Check your application progress periodically via personal account from created candidate profile during your application.

We invite you to get to know more about our company by visiting www.ten.comand follow us on LinkedIn, Instagram, Facebook, X and YouTubefor company updates.

#LI-MK1

About the Company

Technip Energies

Engineering and technology solutions for energy

Technip Energies provides engineering, technology, and construction solutions for the energy industry, with two segments: Projects Delivery (engineering, procurement, and construction of onshore and offshore facilities) and Technology, Products and Services (proprietary technologies, equipment, and consulting). It serves oil and gas, petrochemical, and other industrial clients worldwide, delivering technologies, products, and services alongside large-scale projects. The company differentiates itself by an integrated, end-to-end approach that blends technology development with project delivery, a portfolio of proprietary technologies, and a global footprint across Europe, the Americas, Asia-Pacific, and the Middle East & Africa, with emphasis on energy transition topics like LNG, hydrogen, and carbon capture. Its goal is to help customers meet energy needs and transition objectives by providing practical, scalable engineering and technology solutions for complex energy projects.

Company size: 10,001+
Company stage: IPO
Headquarters: Paris, France
Founded: Not listed

Recently Posted Jobs

Explore more opportunities at Technip Energies

See more jobs