In PersonMust travel throughout regional projects.
Building TradesHVAC & Building Systems
About the job
Requirements
Current driver's license.
Must be able to travel throughout regional projects.
Intent to learn a high level of understanding of total HVAC and Plumbing installation and operation, equipment capabilities, and controls systems architecture and sequences.
Intent to gain an understanding of system start-up, test and balancing, commissioning and diagnosis.
Intent to gain an understanding of Electrical Systems and be able to troubleshoot line side work and troubleshoot/resolve low voltage (24V) issues.
Intent to gain a high level of skill in troubleshooting multiple trades and types of systems, including electrical circuits and systems; control components and systems; mechanical equipment such as chillers, cooling towers, air handling units and fans; plumbing equipment such as air compressors, vacuum pumps and sump pumps; mechanical and plumbing hydronic systems and components; and airflow dynamics and components.
Ability to frequently lift or carry up to 75 pounds and assist with lifting up to 120 pounds.
Ability to carry items for extended periods as needed; may frequently lift, carry, or move items weighing up to 50 pounds and occasionally lift or move heavier items up to 100 pounds.
Ability to perform duties involving regular use of hands and arms, standing, walking, sitting, and occasional bending, kneeling, crouching, or balancing; the role requires verbal communication and the ability to hear.
Responsibilities
Assist with piping system flushing and document flushing activities.
Activate equipment and document starting conditions.
Adjust equipment settings so equipment operates according to design drawings and specifications.
Verify equipment is ready to be started by the vendor.
Troubleshoot equipment or system operation issues and provide solutions.
Assist with pre-testing controls and direct digital control point-to-point checks and logic sequencing.
Complete required commissioning documentation.
Communicate commissioning issues to the SPC team.
Assist the commissioning agent with onsite needs or questions.
Execute and assist with coordinating owner training.
Participate in Autodesk Build quality assurance and quality control punch lists.
Assign punch list items to the appropriate field superintendent and close completed items.
Demonstrate the expected installation quality to crew members and maintain quality within budget and schedule constraints.
Work with the project manager to plan, schedule, and coordinate startup and commissioning processes for assigned projects.
Coordinate with other trades on the critical path.
Use specialized tools or equipment such as flow meters, flow hoods, and temporary cooling equipment.
Ensure the startup crew conducts itself professionally when interacting with customers and their representatives.
Maintain concise, orderly files; complete startup documentation for turnover packages; document job-related occurrences; and keep a daily record.
Apply general trade standards and SPC Mechanical standards, find solutions to problems, and provide technical assistance on the best application for an installation when required.
Procure materials as needed within the contract scope, including special wiring, refrigerant for direct expansion startup, glycol, and miscellaneous repair parts.
Job Summary:
To implement the processes by which projects are started up, sequenced, commissioned, turned over, and warrantied. To train customer facilities personnel in the proper operation and maintenance of installed systems and equipment and provide response and support for warranty requests.
Responsibilities: Include assisting a technician in, but not limited to, the following
STARTUP
Assist in piping system flushing and complete documentation for the flushing activities.
Activate and document starting conditions of equipment.
Adjust equipment setting such that it will operate by design drawings and specifications.
Verify that equipment is ready to be started by vendor.
Troubleshoot issues with equipment or system operation and provide solutions.
COMMISSIONING
Assist in pre-testing of controls and DDC point-to-point and logic sequencing.
Complete required Commissioning documentation.
Assist in communication of Commissioning issues to SPC’s team.
Assist Commissioning Agent while they are onsite with any needs or questions they may have.
Execute and assist with coordination of Owner Training.
QA/QC
Participates in Autodesk Build QA/QC punch list.
Assigns punch list items to appropriate field superintendent.
Closes out completed punch list items.
QUALITY OF WORK
Demands the highest quality installation possible within the boundaries of the budget and schedule.
Can personally show the crew members the quality expected of SPC Mechanical.
PLANNING
Works with PM to plan, schedule, and coordinate all start-up and commissioning processes of assigned projects.
Works with other trades on critical path.
Proficient in the use of special tools or equipment such as flow meters, flow hoods, temp cooling etc.
CUSTOMER SERVICE
Displays a courteous and professional manner to customers and their representatives.
Understands the value of each customer to SPC Mechanical regardless of the size or scope of the job.
Ensures that the start-up crew is conducting themselves in a professional manner.
DOCUMENTATION
Keeps files in a concise orderly manner.
Completes startup documentation to be included in turnover packages.
Documents all job-related occurrences.
Keeps a daily record.
TRADE STANDARDS
Is knowledgeable of trade standards in general as well as SPC Mechanical standards in particular.
Displays the ability to find solutions to problems.
When required to do so, provides technical assistance for the best application for a particular installation.
MATERIAL AND EXPENSE CONTROL
Procure material as needed to complete tasks within contract scope such as:
Special wiring as needed
Refrigerant for Dx Startup
Glycol as required
Miscellaneous parts for repairs
Qualifications:
Current driver’s license.
Must be able to travel throughout regional projects.
Intent to learn a high level of understanding of total HVAC and Plumbing installation and operation, equipment capabilities, and controls systems architecture and sequences.
Intent to gain an understanding of system start-up, test and balancing, commissioning and diagnosis.
Intent to gain an understanding of Electrical Systems and be able to troubleshoot line side work and troubleshoot/resolve low voltage (24V) issues.
Intent to gain have a high level of skill in troubleshooting of multiple trades and types of systems such as:
Electrical circuits and systems
Control components and systems
Mechanical equipment such as Chillers, Cooling Towers, Air Handling Units and Fans
Plumbing equipment such as air compressors, vacuum pumps, and sump pumps
Mechanical Hydronic systems and components
Plumbing Hydronic systems and components
Air flow dynamics and components
Work Environment:
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.
While performing the duties of this Job, the employee is occasionally exposed to high, precarious places and outside weather conditions. Ability to frequently lift or carry up to 75 pounds and assist with lifting up to 120 pounds.
While performing the duties of this job, the employee is frequently exposed to moving mechanical parts and the risk of electrical shock. The employee is occasionally exposed to high, precarious places; outside weather conditions, including wet, humid, cold, or hot environments; and vibration.
While performing the duties of this job, the employee regularly uses hands and arms for tasks requiring handling, reaching, and coordination, and engages in a combination of standing, walking, sitting, and occasional postural movements such as bending, kneeling, crouching, or balancing. The position involves verbal communication and the ability to hear.
The employee may frequently lift, carry, or move items weighing up to 50 pounds and may occasionally lift or move heavier items up to 100 pounds, with the ability to carry items for extended periods of time as needed.