In PersonMay require working 50% of hours on nights and weekends; most work hours are spent on the job site.
About the job
Requirements
Seven years of progressively responsible experience monitoring, coordinating, and inspecting a mix of building, airport terminal, utility, civil, and general construction projects.
Knowledge of and ability to apply key regulatory requirements of the building trades and generally accepted practices of the construction industry.
Experience monitoring quality control processes and ensuring work meets contract specifications, industry standards, and project design intent.
Experience utilizing project management systems such as Unifier, Procore, or E-Builder.
Expertise using Bluebeam Revu for document and site management documentation.
Expertise using office productivity software to draft documents, prepare spreadsheets, perform engineering calculations and statistical analyses, prepare presentations and reports, communicate via email, and conduct Internet research.
Ability to perform complex analyses of data and information and make recommendations.
Ability to speak and write effectively.
A high school diploma or a Certificate of General Educational Development (GED).
A state driver’s license in good standing.
OSHA 30-hour Training Certification, or the ability to achieve it within one year of hire.
Must complete airside driver training and pass a test to secure an AOA driving permit.
Must follow relevant safety rules, regulations, and standard operating procedures and use appropriate personal protective equipment in compliance with MWAA safety policies and procedures.
The work requires standing for long periods, walking over rough, uneven, or slippery surfaces, recurring bending, crouching, stooping, stretching, and climbing.
Responsibilities
Inspect general building components and structures.
Monitor contractor progress to ensure activities, milestones, and completion dates are achieved on schedule.
Collect information and draft documents for management action.
Review and validate payment requests to ensure compliance with actual work in place and contract specifications.
Work with engineers, architects, consultants, and MWAA staff to resolve conflicts and concerns.
Verify materials and equipment delivered to the construction site comply with requirements, and observe work methods to ensure the structure is built in accordance with acceptable practices, contract specifications, and safety requirements.
Inspect work in progress and upon completion to ensure acceptable workmanship.
Create daily reports on construction status, progress, and quality control and assurance.
Assist the COTR in developing and reviewing change orders and claims, including preparing scope of work, cost estimates, negotiation strategy, and position statements.
Assist the COTR with coordinating utility outages within the airport for scheduling purposes; coordinate and communicate punch-list items and track them through closeout.
Review project plans and specifications for constructability; review contractor work plans and provide comments to stakeholders; determine whether physical obstructions or other construction difficulties have been anticipated and whether specified materials are readily available.
Inspect materials, work methods, and workmanship for compliance with approved plans and specifications.
Interview contractor employees to ensure labor laws and regulations are followed.
Identify work that does not comply with building codes and notify the COTR of deficiencies in a timely manner.
Confer with the site superintendent regarding construction or design issues and consult on-site and off-site architect/engineer personnel to resolve design conflicts or assess the feasibility of contractor-proposed construction changes.
Prepare timely written documentation, including daily construction reports detailing work performed and identifying non-compliant work.
Write logs, technical notes, and technical summaries.
Monitor construction activities against baseline and progress schedules to ensure on-time completion.
Maintain a deficiency list and track items to ensure timely correction.
Develop draft notices to comply for COTR issuance when required.
Identify and report MWAA and OSHA safety violations to the COTR.
Perform other duties as assigned.
Desired Qualifications
Experience working on major construction projects and contracts in the public sector.
Experience working on construction projects in an active airport environment.
Certification in, and experience implementing, the U.S. Army Corps of Engineers Contractor Quality Control Program methodology and procedures.
Compensation Grade:
S19-H
Salary Range:
$40.55-$58.79
Opening Date:
October 2, 2026
Closing Date:
October 17, 2026
Please Note: All job announcements close at 11:59 p.m. of the day before the posted closing date.
The Construction Inspector – Building/General performs on-site construction inspections and monitors construction operations to ensure compliance with work plans and contract specifications for major construction projects for the Metropolitan Washington Airports Authority (MWAA).
Serves in the Construction Department of the Office of Engineering, located at Washington Dulles International Airport (IAD) or Ronald Reagan Washington National Airport (DCA).
Oversees and inspects construction projects to ensure compliance with project plans, specifications, building codes, and safety regulations. This role involves reviewing contractor work, monitoring construction progress, identifying potential issues, and providing detailed reports. The inspector collaborates with contractors, engineers, and other stakeholders to address construction challenges and ensure quality standards are met. Additionally, monitors, performs coordination, inspects, and reports on Capital Construction Program (CCP) projects and large projects funded by the Capital, Operating and Maintenance Investment Program (COMIP). Performs related functions.
GENERAL RESPONSIBILITIES
Inspects general building components and structure.
Monitors contractor’s progress to ensure activities, milestones, and completion dates are achieved on schedule.
Collects information and draft documents for management action.
Reviews and /validates payment requests to ensure compliance with actual work in place and the contract specifications.
Works with engineers and architects, consultants, and MWAA staff to resolve conflicts and concerns.
Verifies materials and equipment delivered to the construction site comply with requirements. Observes work and work methods to ensure the structure is being built in accordance with acceptable work practices, contract specifications, and safety requirements.
Conducts inspection of work both in progress and upon completion to ensure an acceptable level of workmanship.
Creates daily reports on construction status and progress and quality control/assurance.
Assists COTR in development and review of change orders and claims including preparation of scope of work, cost estimates, negotiation strategy, and position statements.
Assists the COTR as required for coordinating utility outages within the Airport for scheduling purposes. Coordinates and communicates punch list items and provides tracking through closeout of individual items.
Reviews project plans and specifications to ensure constructability. Reviews contractor work plans and provides comments to various stakeholders. Determines whether physical obstructions or other construction difficulties have been anticipated and whether materials specified are readily available.
Inspects materials, work methods, and workmanship to ensure each is in accordance with the approved plans and specifications.
Interviews contractor employees to ensure labor laws and regulations are followed.
Identifies work that is not in compliance with building codes and takes proper and timely action to notify the COTR of deficiencies.
Confers with site superintendent regarding construction or design issues. Consults with on-site and off-site architect/engineer personnel in the resolution of design conflicts or feasibility of construction changes proposed by contractors.
Prepares timely written documentation, including daily construction reports that details work performed and identifying non-compliant work.
Writes various logs, technical notes and technical summaries.
Monitors construction activities, comparing them against baseline and progress schedules to ensure on-time completion of work.
Maintains a deficiency list and tracks to ensure timely correction.
Develops draft notices to comply for COTR issuance, when required.
Follow all relevant safety rules, regulations, and standard operating procedures. Identifies and reports MWAA and OSHA safety violations to the COTR.
Performs other duties as assigned.
QUALIFICATIONS
Seven years of progressively responsible experience monitoring, coordinating, and inspecting a mix of Building, Airport Terminal, Utility, Civil, and General Construction projects.
Knowledge of and ability to apply key regulatory requirements of the building trades and generally accepted practices of the construction industry.
Experience monitoring quality control processes and ensuring work meets contract specifications, industry standards, and project design intent.
Experience utilizing project management systems (e.g. Unifier, Procore, E-Builder).
Expertise using Bluebeam Revu for document and site management documentation.
Expertise using office productivity software to draft documents, prepare spreadsheets, perform engineering calculations and statistical analyses, prepare presentations, prepare reports, communicate via email, conduct Internet research, etc.
Ability to perform complex analyses of data and information and make recommendations.
Ability to speak and write effectively.
PREFERRED QUALIFICATIONS
Experience working on major construction projects and contracts in the public sector.
Experience working on construction projects in an active airport environment.
Certification in, and experience implementing, the U.S. Army Corps of Engineers Contractor Quality Control Program methodology and procedures.
EDUCATION
A high school diploma or a Certificate of General Educational Development (GED).
CERTIFICATIONS AND LICENSES REQUIRED
A state driver’s license in good standing.
OSHA 30-hour Training Certification (or must achieve within 1 year of hire)
NECESSARY SPECIAL FACTORS
Operates vehicle landside and airside (AOA). Must take airside driver training and pass test to secure AOA driving permit.
May be required to work 50% of the work hours on nights and weekends depending on project schedules and airport operations.
The work requires some physical exertion, such as long periods of standing; walking over rough, uneven or slippery surfaces; recurring bending, crouching, stooping, stretching, climbing. This position requires a predominant amount of work hours be spent on the job site.
Involves exposure to common construction workplace hazards and adverse weather. Position requires the use of appropriate Personal Protective Equipment (PPE) in compliance with MWAA safety policies and procedures. There is risk of injury from moving construction equipment and unstable materials in the work area.
A background security investigation will be required for all new hires.
Metropolitan Washington Airports Authority is an Equal Opportunity Employer.| Follow us on Twitter @MWAAcareers.