B

Blue Origin

Builds rockets, engines and lunar spacecraft

Senior Power Electronics Engineer - Power Distribution

Power Systems EngineeringConfirmed live in the last 24 hours
Full-time$144.2k - $219.5kIn-person

About the Job

Requirements

  • A bachelor's degree in Electrical Engineering, Computer Engineering, or a closely related field, plus 7 or more years of hands-on electronics hardware development experience.
  • Demonstrated design experience with power distribution architectures, including solid-state power controllers, relay switching, overcurrent protection, and fault isolation, in a spacecraft or high-reliability application.
  • Design experience with multi-voltage or dual-bus power systems above 50V, including load management, in-rush current mitigation, and switch sequencing.
  • Hands-on experience leading or substantially contributing to a hardware qualification campaign per MIL-STD-1540, SMC-S-016, ECSS-E-ST-10-03, or a directly comparable standard, including test plan development and anomaly resolution.
  • Experience with radiation-tolerant or radiation-hardened design practices for space environments, including component selection and total ionizing dose analysis.
  • Must be a U.S. citizen, U.S. national, U.S. permanent resident, or lawfully admitted into the U.S. as a refugee or granted asylum, for access to export-controlled technical data.

Responsibilities

  • Lead circuit design for the Dual Voltage Distribution Box, including solid-state power controllers, relay-based switching, overcurrent protection, in-rush current limiting, and fault isolation across both voltage domains of the spacecraft power bus.
  • Define load switch sequencing, priority shedding logic, and fault response behavior in coordination with the Fault Management and Command and Data Handling teams.
  • Own the DVDB telemetry architecture, including current, voltage, and switch state monitoring, and define avionics interfaces for health monitoring and commanding.
  • Derive and maintain DVDB hardware requirements, interface control documents, and design specifications in coordination with systems engineering and adjacent subsystems, including thermal, structures, harness, avionics, and powered loads.
  • Participate in failure mode and effects analysis and failure mode, effects, and criticality analysis activities and drive single-point failure elimination throughout the design.
  • Optimize the DVDB design for high-rate manufacturing, including component commonality, design for manufacturing and design for test compliance, and unit cost targets without compromising reliability or performance.
  • Define and transition automated test equipment from development to production, including load switching verification and fault coverage validation for rate manufacturing.
  • Develop and execute hardware qualification plans per MIL-STD-1540, SMC-S-016, or equivalent standards, and lead anomaly investigation and resolution.
  • Serve as the technical authority for the DVDB during vehicle integration and flight acceptance test campaigns across all powered interfaces.
  • Own and maintain the complete DVDB design package, including schematics, printed circuit board layouts, bills of materials, drawings, and analysis reports, within the product lifecycle management configuration management system.

Desired Qualifications

  • A graduate degree in Electrical Engineering, Aerospace Engineering, or a related field.
  • 9 or more years of power electronics or power systems development experience for space or other harsh environments.
  • Experience with dual-bus or multi-voltage distribution architectures and cross-strapping strategies for fault tolerance and load flexibility.
  • Experience with current sensing, telemetry calibration, and health monitoring integration for distributed power systems.
  • Experience in high-rate production electronics environments, including design for manufacturing and design for test optimization, production test development, and yield improvement.
  • Experience designing and integrating power electronics with mechanical structures for thermal management.
  • Proficiency with Altium Designer or a comparable tool for schematic capture and printed circuit board layout.
  • Proficiency with LTspice or a comparable SPICE-based simulation tool for circuit analysis.
  • Experience with Windchill product lifecycle management or an equivalent configuration management system.
  • Experience with electromagnetic interference and electromagnetic compatibility design and compliance per MIL-STD-461 or equivalent.
  • Background in safety-critical systems development across aerospace, automotive, medical, or defense applications.
  • Strong written and verbal technical communication skills, with a demonstrated ability to author specifications, analysis reports, and test plans independently.

About the Company

Blue Origin

Builds rockets, engines and lunar spacecraft

Blue Origin builds rockets, engines and spacecraft for commercial satellite operators and government space programs. Its New Glenn orbital rocket uses a reusable first stage, while Blue Moon landers are designed to transport cargo and astronauts to the lunar surface. The company designs and manufactures liquid-fueled propulsion systems, and its New Shepard vehicle is built for short suborbital trips carrying people and research payloads. Customers pay for launch services and engines, and government development contracts fund work on systems for exploration beyond Earth orbit. Founded by Jeff Bezos in 2000, Blue Origin is headquartered in Kent, Washington.

Company size
10,001+
Company stage
Late Stage VC
Total funding
$10.1B
Headquarters
Kent, WA
Founded
2000

Recently Posted Jobs

Explore more opportunities at Blue Origin

See more jobs