B

Blue Origin

Builds rockets, engines and lunar spacecraft

NDT Technician - Computed Tomography, Level II

Inspection & TestConfirmed live in the last 24 hours
Full-timeFlorida, USANo salary listed

About the Job

Requirements

  • At least 2 years of Level II experience in non-film radiography (digital radiography or computed radiography).
  • At least 1 year of Level II experience in Computed Tomography.
  • Must pass the Radiographic General Test and Specific Test by week 3; General Test study materials will be provided if needed.
  • Meet minimum National Aerospace Standard 410 training requirements in Radiography.
  • Complete 40 hours of Radiation Safety Training.
  • Complete 40 hours of Digital Radiography Training.
  • Qualify to certify to Level II status per National Aerospace Standard 410 requirements in Non-Film Radiography with at least 800 documented experience hours.
  • Meet the minimum vision requirements: near vision of either 20/25 (Snellen) at 16 inches or Jaeger No. 1 at not less than 12 inches; color perception of at least 12 correctly identified panels on the 14-plate Ishihara Color Test.
  • Understand the requirements of ASTM E1695, Standard Practice for Measurement of Computed Tomography System Performance.
  • Understand the requirements of ASTM E1742, Standard Practice for Radiographic Examination.
  • Understand the requirements of ASTM E2445, Performance Evaluation and Long-Term Stability of Computed Radiography System.
  • Understand the requirements of ASTM E2698, Standard Practice for Examination Using Digital Detector Arrays.
  • Have experience operating nondestructive testing inspection equipment and radiation safety equipment.
  • Be able to determine optimal parameters according to defined techniques and system calibrations for inspection activity.
  • Have experience analyzing resultant data from metallic and composite structures.
  • Be able to read and understand blueprints and schematic diagrams.
  • Have experience with Microsoft Office products.
  • Be willing to work overtime, weekends, and off shifts as needed to meet critical deadlines.
  • Be able to lift and transport parts and/or inspection equipment within Occupational Safety and Health Administration requirements.
  • Have experience in both laboratory and field inspection environments.
  • Must be a U.S. citizen or national, U.S. permanent resident (current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.

Responsibilities

  • Establish and maintain techniques to properly examine hardware, ensuring adherence to all safety and specification requirements.
  • Perform Computed Tomography scans and interpret the data.
  • Perform inspections using Digital Radiographic Testing.
  • Interpret inspection results and apply acceptance criteria identified on drawings or shop work orders.
  • Perform all necessary daily, weekly, and monthly process control checks.
  • Document and organize inspection results.
  • Interface and communicate with engineers and/or managers to describe inspection results.

Desired Qualifications

  • Have experience in composite inspections.
  • Have experience with Volume Graphics.
  • Be carded by a state or certifying entity (such as the American Society for Nondestructive Testing or the International Radiation Safety Regulatory Partnership) as a radiographer for X-ray.
  • Meet the minimum National Aerospace Standard 410 training requirements in other methods, including Ultrasonics, Eddy Current, Liquid Penetrant, and Magnetic Particle.
  • Be able to certify in one or more of the following methods per National Aerospace Standard 410: Ultrasonics, Eddy Current, Liquid Penetrant, Magnetic Particle, Infrared, Terahertz, or Laser Shearography.
  • Have training in Computed and Digital Radiography.
  • Have advanced Phased Array training.
  • Have knowledge of industry nondestructive testing standards.
  • Have experience in a production environment, preferably in aerospace.
  • Have experience with automated or robotic inspection equipment.
  • Have at least 1 year of aerospace experience.

About the Company

Blue Origin

Builds rockets, engines and lunar spacecraft

Blue Origin builds rockets, engines and spacecraft for commercial satellite operators and government space programs. Its New Glenn orbital rocket uses a reusable first stage, while Blue Moon landers are designed to transport cargo and astronauts to the lunar surface. The company designs and manufactures liquid-fueled propulsion systems, and its New Shepard vehicle is built for short suborbital trips carrying people and research payloads. Customers pay for launch services and engines, and government development contracts fund work on systems for exploration beyond Earth orbit. Founded by Jeff Bezos in 2000, Blue Origin is headquartered in Kent, Washington.

Company size
10,001+
Company stage
Late Stage VC
Total funding
$10.1B
Headquarters
Kent, WA
Founded
2000

Recently Posted Jobs

Explore more opportunities at Blue Origin

See more jobs