Inactive
M

Mohawk

Global flooring manufacturer serving residential, commercial

Beamer Operator

Machine & Process OperationPosted on Sep 25
Full-timeHillsville, VA, USANo salary listedIn-person

About the Job

Requirements

  • Must be able to read and write in the manner indicated on the job application.
  • Must be able to work the assigned schedule.
  • Must be able to obtain a powered industrial equipment license.
  • Must be able to learn job-specific computer skills.
  • Must be able to perform addition and subtraction calculations.
  • Must be able to read and follow directions and work procedures.
  • Must be able to enter data using basic computer skills.
  • Must be able to perform detailed yarn work, including tracing ends, separating doubles, tying knots, and placing ends in the correct dents on a comb.
  • Must be able to stand or walk continuously during a twelve-hour shift.
  • Must be able to move continuously throughout the extrusion and beaming area during a twelve-hour shift.
  • Must be able to lift fifty pounds without mechanical assistance, with help obtained if needed.
  • Must have adequate normal color vision and depth perception.
  • Must be able to read and understand computer screen charts and learn computer system instructions.
  • Must be able to operate an overhead crane.
  • Must be able to use fine motor coordination to enter computer data, push and turn buttons and knobs, and draw ends through a comb.
  • Must be able to use one-handed and two-handed grips.
  • Must wear hearing protection, safety shoes, and safety glasses with permanent side shields in warehouse and production areas.
  • Must adhere to the plant clothing and footwear policy and wear task-required personal protective equipment.

Responsibilities

  • Operate the beamer to run tricot-sized beams onto a single loom beam according to standard operating procedures.
  • Observe yarn to detect breaks and tangles and repair broken ends when needed.
  • Ensure proper beamer alignment and speed and adhere to quality standards.
  • Complete check sheets and paperwork.
  • Operate powered industrial equipment, including replacing an empty propane tank on a powered industrial truck when necessary.
  • Set tricots behind the beamer using a powered industrial truck.
  • Load and unload tricots using an overhead crane.
  • Tie in tricots by pulling tricot ends to the tie-in rack, racking and tying ends with a knotter machine, running knots onto the loom beam, checking for doubles, and blowing the comb out at each tie-in.
  • Doff full loom beams and replace them with empty loom beams; inspect beams before loading and complete the checklist.
  • Check the barrel in the journal for cracks and check lubrication every 2,000 yards.
  • Use the computer to issue tricots to the beamer and create beam tickets for each doffed beam.
  • Cut waste from the beam when necessary.
  • Operate the warp truck and change its battery when needed.
  • Stop the beamer before entering the creel and follow the specified slow, creep, and control-station safety procedures.
  • Enter the catwalk only when the beamer is in slow, creep, or stop mode.
  • Hook all chains while the beamer is operating and do not reach over chains in the beaming area.
  • Use a UHMW stick to smooth and straighten ends while the beamer is running.
  • Remove and insert the press roll as a two-person task and replace end caps safely or contact maintenance.
  • Participate in safety programs and Neighborhood Watch.
  • Notify supervision of hazardous or unsafe conditions and maintain a clean, orderly work area.
  • Attend job-related training required by supervision.
  • Follow all established standard operating procedures.
  • Perform general housekeeping and other assigned duties.
  • Operate the pull-off machine safely and follow procedures.

Desired Qualifications

  • Previous experience operating a powered industrial truck in a production environment.

About the Company

Mohawk

Global flooring manufacturer serving residential, commercial

Mohawk Industries is a global flooring manufacturer that produces a broad range of flooring products for residential and commercial use, including ceramic tile, carpet, rugs, laminate, luxury vinyl tile, sheet vinyl, and wood flooring. Its products are sold through multiple brands and distributed worldwide, supported by a diversified portfolio designed to serve many customer segments. The company leverages its scale and multi-brand approach to maintain a strong footprint in North America and Europe, expanding through extended sales channels, deeper opportunities with existing customers, and strategic acquisitions. Mohawk’s goal is to grow its market share by broadening its distribution reach, expanding product offerings, and pursuing acquisitions that complement its portfolio.

Company size
10,001+
Company stage
IPO
Headquarters
Calhoun, GA
Founded
1878

Recently Posted Jobs

Explore more opportunities at Mohawk

See more jobs