Cushman & Wakefield

Global commercial real estate services provider

Mobile Operating Engineer

Building & Property MaintenanceConfirmed live in the last 24 hours

Full-timeFort Worth, TX, USA$29.75 - $35

About the Job

Requirements

A valid driver's license is required.
EPA Universal Certification is required.
Strong knowledge of HVAC systems and building operations is required.
A high school diploma or GED equivalent is required.
At least 3 years of related work experience operating mechanical, electrical, and plumbing systems in a commercial property setting is required.
May need an appropriate trade license or permit, such as a Journeyman or Master Electrician License or applicable city licenses and certificates.
May need Universal Technician certification for CFCs depending on market licensure requirements.
Must maintain a valid driver's license and good driving record, with periodic checks where applicable.
Basic computing skills in Outlook, Excel, and Word are required.
Experience operating, maintaining, and performing basic repairs on HVAC systems, heaters, pumps, refrigerant systems, compressors, and water systems is required.
Knowledge of energy management systems, techniques, and operations is required.
Thorough knowledge of building systems operations, maintenance, and repair is required.
May need to work extended periods without relief during priority or emergency situations, work overtime or shifts, and be on call.
Must be able to stoop, stand, climb, frequently lift at least 50 pounds of equipment, and safely install rigging and lifting devices.
Must be able to crouch and reach to install or move equipment by bending at the waist, legs, and spine.
Must be able to move between departments, floors, and properties to perform work.
Must be able to speak clearly and understand information presented orally and in writing.
Must be able to read printed material, drawings, and schematics.
Must complete required annual safety training and comply with the company uniform dress code.

Responsibilities

Perform plumbing, electrical, and HVAC work for the assigned buildings.
Maintain heating and cooling equipment, including DX units, pumps, fan coil units, VAVs, air distribution systems, light commercial package units, and split system units.
Monitor and adjust mechanical equipment, including controls, valves, thermostats, and diffusers, to maintain a comfortable environment.
Verify field conditions and perform necessary repairs or adjustments.
Monitor energy management.
Repair doors, ceilings, hand railings, floors, and other building components; perform general repairs, adjustments, and installations at the properties.
Repair plumbing fixtures, including water closets, urinals, flush valve assemblies, and lavatories.
Perform preventive maintenance in accordance with company standards, building protocols, manufacturer recommendations, and industry best practices, including changing filters; cleaning coils; flushing condensers; lubricating fans, motors, pumps, and motor bearings; inspecting and adjusting belts; replacing motors; aligning pulleys and shafts; monitoring condensers and evaporators; and performing scheduled inspections and routines.
Inspect electrical rooms, IT rooms, backup generators, fire pumps, sump pumps, and ejector pumps when applicable.
Check emergency exit signs and lights, and ensure emergency stairs and exits have clear access.
Replace lamps, light fixtures, and signage, and verify that rooms are clean and unobstructed.
Perform fire and life safety inspections in accordance with NFPA, local jurisdiction requirements, company standards, and building protocols.
Document and report activities to a supervisor.
Respond immediately to emergencies, including fires, evacuations, and equipment failures, and address customer concerns.
Comply with applicable codes, regulations, governmental agency requirements, and company directives related to building operations, and practice safe work habits.
Travel between properties in varying weather conditions.

Desired Qualifications

Graduation from an apprentice program or trade school is preferred.

Job Title

Mobile Operating Engineer

Job Description Summary

Responsible for ensuring the efficient operation and maintenance of all HVAC, mechanical, electrical and plumbing equipment and systems for the assigned property(s). Responsibilities include (but are not limited to) maintaining a clean and safe working environment, performing rounds and inspections, conducting routine assessments, performance of day-to-day preventive and corrective maintenance, painting, and light housekeeping for assigned properties.

Job Description

****** Mobile Position – Supporting Locations in Dallas/Fort Worth*****

What’s Required:

Valid driver’s license
EPA Universal Certification
Strong knowledge of HVAC systems and building operations

Important Education

High School Diploma or GED Equivalent.
Graduate of apprentice program or trade school preferred.

Important Experience

3+ years of related work experience in operating mechanical, electrical, and plumbing systems in a commercial property setting.

Essential Functions and Responsibilities

Perform all plumbing, electrical, or HVAC requirements of the building(s).
Maintain heating and cooling equipment: DX units, pumps, fan coil units, VAVs, air distribution systems, light commercial package units, and split system units.
Monitor and adjust all mechanical equipment necessary to provide a comfortable environment (controls, valves, thermostats, diffusers, etc.).
Verify field conditions and perform any necessary repairs or adjustments.
Monitor Energy Management.
Repair doors, ceilings, hand railings, floors, and other general repairs, adjustments, and installations about the properties.
Perform repairs to plumbing fixtures (water closets, urinals, flush valve assemblies, lavatories, etc.).
Perform preventive maintenance duties in accordance with C&W standards, building protocol, manufacturer recommendations, and industry best practices, including:
- Changing filters
- Cleaning coils
- Flushing condensers
- Lubricating fans/motors, pumps, and motor bearings
- Inspecting and adjusting belts
- Replacing motors
- Aligning pulleys and shafts
- Monitoring condensers and evaporators
- Performing scheduled inspections and routines as directed
Inspect electric rooms, IT rooms, back-up generators, fire pumps, sump pumps, and ejector pumps when applicable.
Check emergency exit signs and lights; ensure clear access to emergency stairs and exits.
Replace lamps, light fixtures, signage; verify rooms are clean and clear of obstructions.
Perform additional fire and life safety inspections per NFPA, local jurisdiction, C&W standards, and building protocol.
Document and report activities to supervisor.
Respond immediately to emergency situations (fire, evacuation, equipment failure, etc.) and customer concerns.
Comply with all applicable codes, regulations, governmental agency, and company directives related to building operations; practice safe work habits.
Complete all required C&W Safety Training annually.
Comply with C&W Uniform Dress Code and maintain a neat, clean appearance while on property.

Additional Eligibility Qualifications

Appropriate license/permit for trade as may be required, i.e. Journeyman or Master Electrician License or City Licenses, such as Refrigeration Certificate of Fitness, High Pressure Boiler License, High Pressure Steam Operator, etc.
May be required to have certification as a Universal Technician for CFC’s depending on market licensure requirements.
Possess and maintain a valid driver’s license and good driving record with periodic checks (where applicable).
Basic Computing Skills in Outlook, Excel & Word.
Experience in operation, maintenance and basic repair of HVAC, heaters, pumps, refrigerant systems, compressors, water systems, etc.
Knowledgeable in energy management systems, techniques and operations.
Thorough knowledge in all building systems operations, maintenance and repair.
May be only maintenance staff member on duty during certain shifts; may be required to work extended periods of time without relief when responding to priority/emergency situations (including overtime type assignments); may require shift work and/or on call duties.

Work Environment

This job operates in a professional office environment.
This role routinely uses standard office equipment such as computers, phones, photocopiers, filing cabinets and fax machines.
Regularly required to travel outside between properties in varying weather conditions.

Physical Demands

Must have ability to stoop, stand, climb, frequently lift a minimum of 50 lbs. of equipment (pumps, tools, ladders) and safely install rigging/lifting devices.
Regularly required to crouch and reach to install/move equipment by bending forward at the waist or by bending legs and spine.
Involves movement between departments, floors, and properties to facilitate work.
Ability to speak clearly so others can understand you.
Ability to read and understand information presented orally and in writing.
Regularly required to utilize vision abilities, allowing reading of printed material, drawings, and schematics.

Cushman & Wakefield also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health, vision, and dental insurance, flexible spending accounts, health savings accounts, retirement savings plans, life, and disability insurance programs, and paid and unpaid time away from work. In addition to a comprehensive benefits package, Cushman and Wakefield provide eligible employees with competitive pay, which may vary depending on eligibility factors such as geographic location, date of hire, total hours worked, job type, business line, and applicability of collective bargaining agreements.
The compensation that will be offered to the successful candidate will depend on factors such as whether the position is covered by a collective bargaining agreement, the geographic area in which the work will be performed, market pay rates in that area, and the candidate’s experience and qualifications.
The company will not pay less than minimum wage for this role.
The compensation for the position is: $29.75 - $35.00Cushman & Wakefield is an Equal Opportunity employer to all protected groups, including protected veterans and individuals with disabilities. Discrimination of any type will not be tolerated.

In compliance with the Americans with Disabilities Act Amendments Act (ADAAA), if you have a disability and would like to request an accommodation in order to apply for a position at Cushman & Wakefield, please call the ADA line at 1-888-365-5406 or email [email protected]. Please refer to the job title and job location when you contact us.

INCO: “Cushman & Wakefield”

About the Company

Cushman & Wakefield

Global commercial real estate services provider

Cushman & Wakefield provides commercial real estate services to property owners, tenants, and investors worldwide. It helps clients buy, sell, lease, manage facilities, and value properties through market research, brokerage, property management, and consulting. Revenue comes from commissions on sales and leases, management and consulting fees, and selective strategic investments in related companies. Its global network across major markets and diverse client focus helps clients optimize real estate strategies and portfolio performance.

Company size: 10,001+
Company stage: IPO
Headquarters: Chicago, IL
Founded: 1917

Recently Posted Jobs

Explore more opportunities at Cushman & Wakefield

See more jobs