B

Blue Origin

Builds rockets, engines and lunar spacecraft

Avionics Hardware Engineer 3

Board & Electronics DesignConfirmed live in the last 24 hours
Full-timeDenver, CO, USAIn-person

About the Job

Requirements

  • A B.S. in Electrical Engineering, Computer Engineering, or a closely related field.
  • At least 5 years of experience designing electronic hardware through the full development lifecycle, from requirements through fabrication, test, and production.
  • Experience with schematic capture in industry-standard EDA tools such as Cadence Allegro/OrCAD, Mentor Capital/PADS, or Altium Designer.
  • Experience performing derating analysis, worst-case circuit analysis, and tolerance analysis for flight or high-reliability hardware.
  • Knowledge of electromagnetic interference and electromagnetic compatibility design principles and circuit-level mitigation techniques.
  • Experience supporting environmental qualification testing, including vibration, thermal, and shock testing, and interpreting test results.
  • Background in analog and digital circuit design, including power electronics, signal conditioning, and communication interfaces such as RS-422, SPI, I2C, or MIL-STD-1553.
  • Experience leading technical design reviews and producing supporting documentation.
  • Experience performing root cause analysis and implementing corrective actions on hardware non-conformances.
  • Must be a U.S. citizen or national, U.S. permanent resident, refugee, or asylee to access export-controlled technical data.

Responsibilities

  • Design analog, digital, power, and mixed-signal circuits for flight avionics applications, including power conversion, actuator drive, communication interfaces, data acquisition, and processor-based systems.
  • Decompose system-level requirements into subcircuit requirements across complex electronic modules while maintaining full traceability.
  • Perform derating, worst-case circuit, tolerance, and thermal analyses for flight-grade hardware.
  • Apply electromagnetic interference and electromagnetic compatibility design techniques at the circuit and module level.
  • Guide printed circuit board layout reviews, including stack-up definition, signal integrity, and power delivery network considerations.
  • Design for manufacturability and testability to support production scalability.
  • Write and manage hardware requirements documents, interface control documents, and design specifications.
  • Prepare and lead preliminary and critical design reviews for assigned projects, including tracking and closing action items.
  • Produce technical documentation that connects design decisions to requirements.
  • Write hardware verification and validation plans with direct traceability to requirements.
  • Support environmental qualification and acceptance testing across the assigned hardware scope.
  • Analyze test data, disposition anomalies, and perform root cause analysis on hardware failures.
  • Develop corrective actions and translate findings into design improvements.
  • Contribute to hardware schedules, budgets, and technical milestones, and hold technical approval authority for assigned deliverables.
  • Participate in tool development, process improvements, and release of engineering standards.
  • Give technical feedback to teammates to strengthen design quality across the group.
  • Support technology maturation and lessons-learned documentation at the department level.

Desired Qualifications

  • An M.S. in Electrical Engineering or a related field.
  • Experience designing avionics hardware for spacecraft, launch vehicles, or in-space systems.
  • Knowledge of radiation-tolerant component selection and design techniques for space environments.
  • Familiarity with MIL-STD-975, MIL-PRF-38535, or equivalent high-reliability parts qualification standards.
  • Experience with power electronics design, including DC/DC converters, battery charge/discharge circuits, or pyrotechnic firing circuits.
  • Background in FPGA- or processor-based avionics subsystems and hardware/software interface definition.
  • Proficiency in SPICE-based simulation tools such as LTspice, PSpice, or SIMetrix.
  • Experience with high-speed printed circuit board design, including signal integrity and power delivery network analysis.
  • Familiarity with AS9100, NASA-STD-8739, or IPC-A-610 quality and workmanship standards.
  • Experience supporting production transitions, including first article inspection, design-for-manufacturability iterations, and production test development.
  • Prior experience as a technical lead or mentor on a hardware development program.
  • Familiarity with model-based systems engineering and requirements management tools such as DOORS and Jama.

About the Company

Blue Origin

Builds rockets, engines and lunar spacecraft

Blue Origin builds rockets, engines and spacecraft for commercial satellite operators and government space programs. Its New Glenn orbital rocket uses a reusable first stage, while Blue Moon landers are designed to transport cargo and astronauts to the lunar surface. The company designs and manufactures liquid-fueled propulsion systems, and its New Shepard vehicle is built for short suborbital trips carrying people and research payloads. Customers pay for launch services and engines, and government development contracts fund work on systems for exploration beyond Earth orbit. Founded by Jeff Bezos in 2000, Blue Origin is headquartered in Kent, Washington.

Company size
10,001+
Company stage
Late Stage VC
Total funding
$10.1B
Headquarters
Kent, WA
Founded
2000

Recently Posted Jobs

Explore more opportunities at Blue Origin

See more jobs