Tesla

Makes electric cars, robotaxis and grid batteries

Fab Technician - Thin Films

Equipment MaintenanceUpdated on Nov 8

Full-timeAustin, TX, USANo salary listed

About the Job

Requirements

An Associate’s degree in Electronics, Mechatronics, Vacuum Technology, or equivalent experience is preferred.
At least 10 years of experience as an equipment technician, maintenance technician, or original equipment manufacturer (OEM) field service engineer on semiconductor wafer process or metrology equipment in a cleanroom fab is required.
At least 15 years of experience on advanced-node logic or memory tools from Lam, AMAT, ASML, TEL, SCREEN, KLA, ASM, Ebara, or equivalent is preferred.
Hands-on troubleshooting experience with at least two of the following on 200 mm or 300 mm tools is required: high vacuum, radio frequency (RF)/plasma, toxic or corrosive gas or chemical delivery, and atmospheric or vacuum wafer robotics.
Depth in one process module and working competence in a second are preferred.
Proven chamber or wet-cleans recovery after preventive maintenance, leak, particle, or RF mismatch events is required, including helium leak check, residual gas analysis (RGA), and residual gas or particle data review.
Ability to read and mark up electrical schematics, mechanical drawings, P&IDs, and Tool Hookup Design Packages is required.
Comfort with multimeters, oscilloscopes, leak detectors, and RF diagnostic tools is required.
Experience training and certifying other technicians on preventive maintenance, lockout/tagout (LOTO), and tool-specific procedures is required.
Experience standing up a new fab, including crate-open, facility hookup, trades coordination, and OEM commissioning, is preferred.
Working knowledge of manufacturing execution system (MES) or computerized maintenance management system (CMMS) work orders, statistical process control (SPC) alarms, and basic Excel is required.
Cleanroom discipline at ISO Class 3–5 and hazardous gas or chemical handling are required.
Military electronics, aviation avionics, or industrial controls background is a plus.

Responsibilities

Own end-to-end tool installation from crate-open through process release for semiconductor process and metrology equipment, including etch, chemical vapor deposition (CVD)/atomic layer deposition (ALD), lithography/track, wet cleans, chemical mechanical planarization (CMP), implant, diffusion, or in-line metrology.
Use Tool Hookup Design Packages as the field source of truth, including utility matrices, stick diagrams, P&IDs, point-of-use valve manifold box (POU/VMB) laterals, electrical one-lines, seismic/pad drawings, exhaust/abatement plans, and isometrics; compare packages with as-built conditions, redline discrepancies, and close punchlist items with design engineering before OEM startup.
Interface daily with mechanical, piping, electrical, instrumentation, rigging, and general contractor trades during hookup; sequence bay and subfab work, verify stick and lateral installations against the package, witness pressure tests and continuity checks, and enforce cleanliness, slope, labeling, and LOTO standards.
Commission new equipment through facility utility bring-up, including ultra-pure water (UPW), process cooling water (PCW), clean dry air (CDA), process gas, vacuum, exhaust, abatement, and drain; complete input/output and interlock checkout, leak checks, robot teaching, and OEM site acceptance test (SAT)/factory acceptance test (FAT) close-out, then hand off to process qualification with documented as-commissioned data.
Execute and improve preventive maintenance, chamber cleans, wet-clean kit changes, leak checks, and recovery sequences so tools return to process-worthy condition, documenting particle, vacuum, and electrical results.
Troubleshoot vacuum, RF/plasma, gas and chemical delivery, pneumatics, interlocks, thermal systems, and wafer-handling robots to the component level.
Serve as the work-center point of contact with OEM field service during installation, commissioning, escalation, and major preventive maintenance events.
Partner with process and equipment engineering on first-of-kind configurations, site-preparation gaps, punchlists, and process-of-record transfer.
Write, redline, and release procedures, checklists, LOTO sequences, and training materials.
Maintain tool logs, parts demand, and CMMS tickets; order, kit, and stage critical spares.
Enforce cleanroom protocol, chemical and gas safety, LOTO, and environmental, health, and safety (EHS) requirements, stopping work when unsafe.
Support compressed-week and off-shift coverage and travel between Giga Texas and the production fab site.

Desired Qualifications

15+ years on advanced-node logic or memory tools from Lam, AMAT, ASML, TEL, SCREEN, KLA, ASM, Ebara, or equivalent.
Depth in one process module and working competence in a second.
Experience standing up a new fab, including crate-open, facility hookup, trades coordination, and OEM commissioning.
Military electronics, aviation avionics, or industrial controls background.

Category	Terafab
Location	Austin, Texas
Requisition ID	286849
Type	Full-time

Job Description

We are building Terafab, a vertically integrated semiconductor factory at unprecedented scale. Logic, memory, photomask, and advanced packaging under one roof — the factory that will produce the compute for SI5, SI6, Optimus, and DataSats. The research fab at Giga Texas is standing up first; the high-volume production fab follows. As the Master Technician, you will install, commission, qualify, maintain, and improve process equipment from crate-open through first wafers and into production. That includes owning tool hookup against THDPs, facility utility bring-up, OEM SAT/FAT close-out, chamber recovery, robot teach, and the procedures that keep tools process-worthy. This is a greenfield opportunity, and you will be the person the shift calls when a chamber will not recover, a robot will not teach, or a PM has to be right the first time — writing the procedures other technicians run and training them to your standard at one of the most ambitious fabs in the world.

Job Responsibilities

Own end-to-end tool install from crate-open through process release for semiconductor process and metrology equipment (etch, CVD/ALD, lithography/track, wet cleans, CMP, implant, diffusion, or in-line metrology)
Work from Tool Hookup Design Packages (THDPs) as the field source of truth (utility matrices, stick diagrams, P&IDs, POU/VMB laterals, electrical one-lines, seismic/pad, exhaust/abatement, and isometrics); walk packages against as-built conditions, redline discrepancies, and close punchlist items with design engineering before OEM startup
Interface daily with mechanical, piping, electrical, instrumentation, rigging, and GC trades during hookup: sequence bay and subfab work, verify stick and lateral installs against the THDP, witness pressure tests and continuity checks, and hold trades to cleanliness, slope, labeling, and LOTO standards
Commission new equipment through facility utility bring-up (UPW, PCW, CDA, process gas, vacuum, exhaust, abatement, drain), I/O and interlock checkout, leak checks, robot teach, OEM SAT/FAT close-out, and handoff to process qualification with documented as-commissioned data
Execute and improve preventive maintenance, chamber cleans, wet cleans kit changes, leak checks, and recovery sequences so tools return to process-worthy condition with documented particle, vacuum, and electrical results; troubleshoot vacuum, RF/plasma, gas and chemical delivery, pneumatics, interlocks, thermal systems, and wafer-handling robots to the component level
Serve as the work-center point of contact with OEM field service during install, commissioning, escalation, and major PM events; partner with process and equipment engineering on first-of-kind configs, site prep gaps, punchlists, and process-of-record transfer while writing, redlining, and releasing procedures, checklists, LOTO sequences, and training materials
Maintain tool logs, parts demand, and CMMS tickets; order, kit, and stage critical spares; enforce cleanroom protocol, chemical/gas safety, LOTO, and EHS requirements (stopping work when unsafe); and support compressed-week/off-shift coverage and travel between Giga Texas and the production fab site

Job Requirements

Associate’s Degree in Electronics, Mechatronics, Vacuum Technology, or equivalent experience preferred
10+ years as an equipment technician, maintenance technician, or OEM field service engineer on semiconductor wafer process or metrology equipment in a cleanroom fab (15+ years on advanced-node logic or memory tools from Lam, AMAT, ASML, TEL, SCREEN, KLA, ASM, Ebara, or equivalent preferred)
Hands-on troubleshooting experience with at least two of the following on 200 mm or 300 mm tools: high vacuum, RF/plasma, toxic/corrosive gas or chemical delivery, or atmospheric/vacuum wafer robotics; depth in one process module and working competence in a second preferred
Proven chamber or wet-cleans recovery after PM, leak, particle, or RF mismatch events, including helium leak check, RGA, and residual gas/particle data review
Ability to read and mark up electrical schematics, mechanical drawings, P&IDs, and Tool Hookup Design Packages; comfortable with multimeters, oscilloscopes, leak detectors, and RF diagnostic tools
Experience training and certifying other technicians on PM, LOTO, and tool-specific procedures; experience standing up a new fab (crate-open, facility hookup, trades coordination, and OEM commissioning) preferred
Working knowledge of MES/CMMS work orders, SPC alarms, and basic Excel; cleanroom discipline at ISO Class 3–5 and hazardous gas/chemical handling; military electronics, aviation avionics, or industrial controls background a plus

About the Company

Tesla

Makes electric cars, robotaxis and grid batteries

Tesla makes electric cars and batteries that store power for homes and utilities, and it develops self-driving software and humanoid robots. In 2023, its Model Y became the first electric vehicle to rank as the world's best-selling car. Buyers order the Model 3 sedan, Model Y SUV, or Cybertruck pickup directly from Tesla instead of through dealers, and they charge on its Supercharger fast-charging network. It also sells Megapack and Powerwall batteries, runs a robotaxi service, and charges drivers a monthly fee for self-driving software that still needs their supervision. Tesla was founded in 2003, with Elon Musk as its lead early investor and a recognized co-founder, and it is based in Austin, Texas.

Company size: 10,001+
Company stage: IPO
Headquarters: Austin, TX
Founded: 2003

Recently Posted Jobs

Explore more opportunities at Tesla

See more jobs