H

Humanoid

General-purpose humanoid robots for industry

Senior Low-level Control Engineer - End-Effectors

Robotics & Autonomous SystemsConfirmed live in the last 24 hours
Full-timeLondon, UKIn-person

About the Job

Requirements

  • Shipped real-time-safe, object-oriented C++ control software running on real hardware.
  • Tuned and validated controllers on physical actuators, including sensor calibration and bring-up.
  • Modeled, identified, and controlled real mechanical transmissions, including gearing, cables or tendons, differentials, coupled linkages, or underactuated mechanisms, and addressed their compliance, friction, and backlash.
  • Worked on end-effectors or comparable multi-degree-of-freedom mechanisms, including grasp control and supporting sensing.
  • Debugged at the fieldbus and operating-system layers, for example EtherCAT or CAN on an RTOS or real-time Linux.
  • Strong control theory foundation in linear and nonlinear control, stability, observers, state estimation, feedback and feedforward, filtering, and frequency-domain analysis, applied to multi-degree-of-freedom mechanisms via Jacobians, numerical inverse and forward kinematics, and URDF/Xacro.

Responsibilities

  • Tune and validate actuator- and joint-space control loops, including PID, feedforward, impedance/admittance, observers, and state feedback, for multi-degree-of-freedom end-effectors in ROS 2.
  • Develop grasp-level behaviours, including grasp force control, compliant closing, slip detection and correction, and adaptive grasping on underactuated grippers.
  • Implement safety and fault-handling mechanisms, including thermal and over-current protection, stall and jam detection, grip-loss detection, and safe behaviour on fault.
  • Build and identify models of actuators, transmissions, and mechanisms—including geared, cable/tendon-driven, differential, coupled, and underactuated designs—and account for compliance, friction, backlash, hysteresis, cable stretch, and pretension effects.
  • Own the joint-to-actuator abstraction for these mechanisms and correctly expose joint versus actuator state through the control stack.
  • Contribute directly to transmission mechanism design by working with mechanical engineers on routing, reduction ratios, degrees-of-freedom coupling, and underactuation strategy, and bring controllability and observability implications into design discussions early.
  • Integrate and calibrate end-effector sensing, including force/torque, tactile, encoders, temperature/current, and vacuum feedback, with real-time acquisition across the control stack.
  • Bring up and debug new end-effectors hands-on, including test-stand work and vendor-supplied units.
  • Coordinate with mechanical and electronics engineers across sites on actuation, transmission, and sensing requirements.
  • Work with data collection, applications, and deployment teams to ensure end-effectors work reliably in real use.

Desired Qualifications

  • BLDC motor control, including commutation, current control, and torque optimization.
  • ROS 2 control internals, including hardware interfaces, controllers, controller manager, plugins, and lifecycle nodes.
  • Tendon- or cable-driven mechanisms, including pretension management, routing friction, and wear behaviour.
  • Tactile sensing integration; vacuum and suction tooling, including multi-cup arrays and grip-loss handling.
  • System identification toolchains and simulation environments such as MATLAB/Simulink, MuJoCo, and Isaac Sim.

About the Company

Humanoid

General-purpose humanoid robots for industry

Humanoid is building general-purpose humanoid robots for industrial use in manufacturing, logistics, and retail. Its robots use a combination of wheeled and bipedal motion, proprietary hardware, and the KinetIQ AI brain to perform tasks like goods handling, picking, and packing. The company works with partners such as Schaeffler, SAP, NVIDIA, Bosch, and Siemens to deploy robots in real-world settings. Its goal is to move from pilots to widespread commercial deployments by scaling production of wheeled robots and advancing KinetIQ capabilities.

Company size
201-500
Company stage
Series A
Total funding
$202M
Headquarters
London, United Kingdom
Founded
2024

Recently Posted Jobs

Explore more opportunities at Humanoid

See more jobs