Texas Instruments

Makes analog and embedded chips in its own plants

Facilities Resident Engineer

Power Systems EngineeringConfirmed live in the last 24 hours

Full-timeKuala Lumpur, Federal Territory of Kuala Lumpur, MalaysiaNo salary listed

About the Job

Requirements

Hold a valid Suruhanjaya Tenaga (ST) JEK competency certificate at 11 kV, 33 kV or 132 kV.
Have a minimum of 5 years of relevant experience in high-voltage electrical installation operation, maintenance, testing, commissioning or project engineering.
Have strong practical experience with high-, medium- and low-voltage switchgear, transformers, protection systems and electrical distribution.
Understand the Electricity Supply Act 1990, Electricity Regulations 1994 and applicable Suruhanjaya Tenaga requirements.
Understand electrical switching, isolation, Permit to Work and lockout/tagout requirements.
Be willing and capable of developing toward the 132 kV Resident Engineer/competency requirements if existing competency is below 132 kV.
Be able to work in a 24/7 critical manufacturing environment and respond to electrical emergencies when required.
Hold a bachelor's degree in Electrical Engineering or equivalent.

Responsibilities

Act as a registered competent person and company advisor regarding Electricity Supply Act 447 and Electricity Regulation 1994, ensuring compliance and carrying out the statutory duties of an 11 kV, 33 kV or 132 kV Resident Engineer.
Liaise between the owner and the Energy Commission, including submitting weekly Borang I to Suruhanjaya Tenaga.
Sign the IOM between the owner and Tenaga Nasional Berhad.
Liaise with the National Load Dispatch Center, GSO, Tenaga Nasional Berhad and Suruhanjaya Tenaga for required switching.
Ensure the site's electrical installation, operation and maintenance activities comply with statutory requirements and approved operating practices.
Prepare, review and submit statutory reports, notifications, inspection records and other documentation required by Suruhanjaya Tenaga.
Support appointment, registration and competency requirements for electrical competent persons at the site.
Carry out Resident Engineer duties in accordance with applicable statutory requirements and site authorization.
Advise and assist in establishing the Emergency Response Plan and Emergency Remedial and Recovery Action Plan.
Monitor and analyze alarms, and guide engineers in updating FMEA and electrical risk assessments.
Inspect 132 kV installations weekly and submit reports to the Energy Commission.
Liaise with Tenaga Nasional Berhad, the National Load Dispatch Center, local authorities, legal and ESH teams on power-supply outages and planned shutdown maintenance; respond to supply interruptions and breakdowns.
Coordinate with Tenaga Nasional Berhad, Suruhanjaya Tenaga, contractors and relevant stakeholders on electrical supply, shutdown, maintenance and regulatory activities.
Review and advise on Permit to Work for electrical projects and maintenance, ensuring safety standards are met.
Ensure maintenance and operations programs are implemented to achieve sustainable performance of installations within scope and comply with legal requirements and internal control limits.
Ensure compliance with laws and regulations relating to electrical systems and installations.
Contribute to green initiatives through system optimization in energy use, maintenance and operations.
Review and advise on project design and commissioning in accordance with applicable acts.
Perform other duties or responsibilities assigned from time to time.
Communicate with team members and stakeholders.
Respond to emergencies by reaching the site within the timeframe specified by site requirements to support site recovery.
Provide technical oversight and guidance for safe operation and maintenance of the site's 132 kV and 11 kV electrical systems.
Provide technical guidance to Facilities Engineers and Chargemen on high-voltage switching, isolation, energization, restoration and abnormal operating conditions.
Review switching programs, switching instructions and electrical operating procedures.
Support planned shutdowns, maintenance, testing and commissioning activities.
Respond to electrical supply interruptions, equipment failures and major electrical incidents.
Support reliable operation of critical electrical systems.
Work with the Facility Operations Manager to review day-to-day operations and audit and evaluate electrical installations for compliance.
Oversee high- and medium-voltage distribution systems, including 132 kV and 11 kV switchgear and breakers, transformers and protection relays.
Oversee electrical testing and commissioning, including transformer turns ratio testing, insulation resistance, power-factor insulation testing, dissolved gas analysis, dielectric breakdown voltage testing, circuit-breaker testing and protective-relay calibration.
Oversee low-voltage systems at 415 V and 208 V.
Review power-system studies, including short-circuit, coordination and arc-flash studies.
Interpret power-system and controls single-line diagrams.
Support semiconductor factory power-supply distribution, emergency generator systems, uninterruptible power supply systems, voltage sag correctors, variable-speed drives and automatic or closed-transition transfer switches.

Change the world. Love your job.

Texas Instruments (TI) is looking for an experienced 11 kV, 33 kV or 132 kV Resident Engineer to join our team. As a Facilities Engineer at TI, you'll be directly responsible for building utility systems in support of a semiconductor wafer fab. TI Facilities operates over 150 different utility systems that include chemicals, gasses, variety of electrical systems, water systems, HVAC, waste, vacuum, and controls. These systems are designed to run 24 hours a day, 365 days a year without interruption, creating a state of the art manufacturing environment. Facilities works closely with TI's manufacturing team to understand how the utility systems impact the process as well as how to reduce consumption.

Responsibilities include:

The candidate should hold a valid ST JEK competency at 11 kV, 33 kV or 132 kV, with strong HV electrical experience. Candidates with 11 kV or 33 kV competency will be expected to develop the required knowledge, site experience and competency toward supporting the site's 132 kV Resident Engineer requirements.
To act as a registered competent person and advisor for the company on Electricity Supply Act 447 and Electricity Regulation 1994. Responsible to ensure compliance to the stipulated act and perform the full duty of a 11kV, 33kV or 132kV resident engineer as stipulated in the act.
Liaison between owner and energy commission in any mode of communications including the submission of weekly Borang I to ST
Responsible to sign IOM between owner and TNB
To liaise with National Load Dispatch Center (NLDC), GSO, TNB and ST for any switching required.
Ensure the site's electrical installation, operation and maintenance activities comply with applicable statutory requirements and approved operating practices
Prepare, review and submit applicable statutory reports, notifications, inspection records and other documentation required by ST.
Support the appointment, registration and competency requirements of electrical competent persons for the site.
Carry out duties associated with the Resident Engineer role in accordance with applicable statutory requirements and site authorization.
Advice and assist in the establishment of the Emergency Response Plan and Emergency Remedial and Recovery Action Plan.
Monitor, review and analyze any alarms & guide the engineers to update FMEA & electrical risk assessment.
To perform weekly inspection of 132kV installations and submit report to Energy Commission.
Liaise with TNB, NLDC and local authorities, legal & ESH related to power supply outage and plan shutdown maintenance, activities pertaining to electrical and HV power distribution system. To attend to power supply interruption and breakdown.
Coordinate with TNB, ST, contractors and other relevant stakeholders for electrical supply, shutdown, maintenance and regulatory activities.
Review & advise on Permit to Work for electrical projects and maintenance. To ensure all safety standards are complied.
Ensure all maintenance and operations programs are properly implemented in order to have optimum and sustainable performances (approximate to designed performances) of all installations included in the limit of scope, complying with all legal requirement and internal control limit
Ensure all relevant law statues and regulation relating to electrical system and installation are comply with
Involve in system optimization in term of energy, maintenance & operation to contribute on green initiatives
To review & advise all the project design and commissioning as per the act.
Carry out other duties or responsibilities assigned from time to time.
Communicate effectively with team members & stakeholders.
In the event of an emergency, the Resident Engineer shall be required to reach the site within specific required timeframe based on the site requirement, to support the efficient recovery of the site.
Provide technical oversight and guidance for the safe operation and maintenance of the site's 132 kV and 11 kV electrical systems.
Provide technical guidance to Facilities Engineers and Chargemen on HV switching, isolation, energization, restoration and abnormal operating conditions.
Review switching programs, switching instructions and electrical operating procedures.
Support planned shutdowns, maintenance, testing and commissioning activities.
Attend to electrical supply interruptions, equipment failures and major electrical incidents.
Support reliable operation of critical electrical systems.
Work closely with Facility Operations Manager to review day to day operation, audit & evaluate all the electrical installation to ensure comply with the act but not limited to:

High & Medium Voltage Distribution :

132kV switchgear and Breakers
11kV Switchgears and Breakers
Transformers
Protection relays
Electrical testing & commissioning (TTR, insulation resistance, Power Factor Insulation,Dissolved Gas Analysis, Dielectric Breakdown Voltage, Circuit Breaker Testing, Protective Relay Calibration)
Low Voltage System (415V & 208V)
Power System Study (Short Circuit, Coordination, Arc Flash)
Power System and Controls single-line diagram interpretation
Semi-conductor factory power supply distributions
Emergency generators system
UPS (Uninterruptible Power Supply) system
VSC (Voltage Sag Correctors)
VFD (Variable-speed drives)
Transfer Switches - ATS (Automatic Transfer Switch) or CTTS (Closed Transition Transfer Switch)

Minimum Qualifications

Bachelor's Degree in Electrical Engineering or equivalent.
Valid Suruhanjaya Tenaga (ST) JEK competency certificate at 11 kV, 33 kV or 132 kV.
Minimum 5 years of relevant experience in HV electrical installation operation, maintenance, testing, commissioning or project engineering.
Strong practical experience with HV/MV/LV switchgear, transformers, protection systems and electrical distribution.
Good understanding of the Electricity Supply Act 1990, Electricity Regulations 1994 and applicable ST requirements.
Strong understanding of electrical switching, isolation, Permit to Work and LOTO requirements.
Willingness and capability to develop toward the 132 kV Resident Engineer / competency requirements where the candidate's existing competency is below 132 kV.
Able to work in a 24/7 critical manufacturing environment and respond to electrical emergencies when required.

About the Company

Texas Instruments

Makes analog and embedded chips in its own plants

Texas Instruments designs and makes analog and embedded processing chips, the basic parts inside cars, factory equipment, data centers, and consumer electronics, and it sells one of the broadest chip catalogs in the industry. In 1958, its engineer Jack Kilby built the first integrated circuit, the building block of modern electronics, and later won a Nobel Prize for it. Its analog chips regulate power and convert signals such as sound and heat into data, while its microcontrollers act as small built-in computers, and TI earns money selling both to device makers. It also makes the graphing calculators many students use in math class. Texas Instruments was founded in 1930 and is based in Dallas, Texas.

Company size: 10,001+
Company stage: IPO
Headquarters: Dallas, TX
Founded: 1930

Recently Posted Jobs

Explore more opportunities at Texas Instruments

See more jobs