B

Blue Origin

Builds rockets, engines and lunar spacecraft

NDT Technician - Multiple Teams

Inspection & TestConfirmed live in the last 24 hours
Full-timeWashington, USA$32.15 - $45In-person

About the Job

Requirements

  • Qualify to certify to Level II status for angle beam welds under ASME BPVC V, ISO 9712, or ASNT CP189 requirements in Ultrasonic, with at least 800 documented experience hours.
  • Meet minimum NAS-410 training requirements in ultrasound methods: 80 hours of conventional UT and 80 hours of phased array training.
  • Pass the Ultrasonic General Test and Specific Test by week 3; General Test study materials will be provided if needed.
  • Meet the minimum vision requirements: near vision of either 20/25 (Snellen) at 16 inches or Jaeger No. 1 at not less than 12 inches, and correctly identify at least 12 panels on the 14-plate Ishihara color test.
  • Be familiar with and understand ASTM E164 Standard Practice for Contact Ultrasonic Testing of Weldments.
  • Be familiar with and understand ASTM E2375 Standard Practice for Ultrasonic Testing of Wrought Products.
  • Be familiar with and understand ASTM E2700 Standard Practice for Contact Ultrasonic Testing of Welds Using Phased Arrays.
  • Determine optimal parameters according to defined techniques and system calibrations for inspection activity.
  • Analyze resultant data from metallic and composite structures.
  • Read and understand blueprints and schematic diagrams.
  • Have experience with Microsoft Office products.
  • Be willing to work overtime, weekends, and off shifts as needed to meet critical deadlines.
  • Be able to work off shifts.
  • Lift and transport parts and/or inspection equipment within OSHA requirements.
  • Have experience in both laboratory and field inspection environments.
  • Be a U.S. citizen or national, U.S. permanent resident, or lawfully admitted into the U.S. as a refugee or granted asylum.
  • Be comfortable working from platforms, scissor lifts, and/or aerial boom lifts.

Responsibilities

  • Establish and maintain techniques to properly examine hardware, ensuring adherence to all safety and specification requirements.
  • Perform inspections using ultrasonic equipment.
  • Interpret inspection results and apply acceptance criteria identified on drawings or shop work orders.
  • Document and organize inspection results.
  • Communicate inspection results to engineers and/or managers.
  • Perform volumetric nondestructive evaluation inspections using advanced phased array ultrasonics.
  • Support research and development into full matrix capture phased array ultrasonic for operational improvement and optimization.
  • Assist in training and developing others within the team.
  • Support development of nondestructive evaluation inspection techniques for complex geometries.

Desired Qualifications

  • Advanced phased array training, including Total Focusing Method.
  • Eddy Current Array training and experience.
  • Be familiar with and understand ASTM E2884 Standard Guide for Eddy Current Testing of Electrically Conducting Materials Using Conformable Sensor Arrays.
  • Be familiar with and understand NASA PRC-6509 Process Specification for Eddy Current Inspection.
  • Experience analyzing resultant data from metallic and composite structures.
  • Experience in pulse echo composites inspection.
  • Ability to read and understand blueprints and schematic diagrams.
  • Be carded by a state or certifying entity, such as ASNT or IRRSP, as a radiographer for X-ray.
  • Ability to meet minimum NAS-410 training requirements in other methods, including Radiography, Eddy Current, Liquid Penetrant, and Magnetic Particle.
  • Ability to certify in one or more of the following methods under NAS-410: Radiography, Eddy Current, Liquid Penetrant, Magnetic Particle, Infrared, or emergent methods such as Terahertz and/or Laser Shearography.
  • 40 hours of Radiation Safety Training.
  • 40 hours of Digital Radiography Training.
  • Training in Computed and Digital Radiography.
  • Knowledge of industry nondestructive testing standards.
  • Experience in a production environment, preferably in aerospace.
  • Experience with automated/robotic inspection equipment.
  • At least 1 year of aerospace experience.

About the Company

Blue Origin

Builds rockets, engines and lunar spacecraft

Blue Origin builds rockets, engines and spacecraft for commercial satellite operators and government space programs. Its New Glenn orbital rocket uses a reusable first stage, while Blue Moon landers are designed to transport cargo and astronauts to the lunar surface. The company designs and manufactures liquid-fueled propulsion systems, and its New Shepard vehicle is built for short suborbital trips carrying people and research payloads. Customers pay for launch services and engines, and government development contracts fund work on systems for exploration beyond Earth orbit. Founded by Jeff Bezos in 2000, Blue Origin is headquartered in Kent, Washington.

Company size
10,001+
Company stage
Late Stage VC
Total funding
$10.1B
Headquarters
Kent, WA
Founded
2000

Recently Posted Jobs

Explore more opportunities at Blue Origin

See more jobs