Allegiant Air

Low-cost, all-jet leisure travel carrier

Avionics & System Engineer

AvionicsConfirmed live in the last 24 hours

Full-timeLas Vegas, NV, USA

About the Job

Requirements

A bachelor's degree from an accredited university in engineering, engineering sciences, mechanical, aeronautics, or a related discipline; alternatively, a high school diploma or GED plus FAA Airframe & Powerplant certification and at least five years of airline, original equipment manufacturer (OEM), or military aircraft systems engineering experience; or a high school diploma or GED plus ten years of such experience.
Knowledge of OEM service bulletins, airworthiness directives, supplemental type certificates, Federal Aviation Administration regulations, and components maintenance manuals.
Ability to interpret and apply OEM wiring and schematic diagram manuals.
Hands-on experience working with hydraulic systems, aircraft wiring changes, and/or aircraft systems testing procedures such as 14 CFR Part 23 and Part 91 system testing.
Ability to collaborate effectively within and outside the Engineering department to meet stakeholder expectations.
Ability to take ownership and manage projects to completion, including conducting aircraft surveys, identifying and implementing technical solutions, and liaising with company teams and OEMs.
Ability to develop engineering standards, troubleshooting instructions, and training materials for repetitive or nonconventional problems to improve operational performance.
Proficiency with TRAX, Arbortext editing software, and Microsoft Office products.
Ability and willingness to travel domestically and internationally to OEM and vendor locations, attend conferences, and support Line Maintenance.
Ability to lift 50 pounds and work on the flight line and in maintenance shop environments.
Ability and willingness to wear required personal protective equipment, including high-visibility clothing, ear protection, and safety glasses.
Must be authorized to work in the United States and pass a criminal background check.
Must have a valid, unexpired passport book.

Responsibilities

Research and provide data to support developing modifications that improve fleet reliability and ensure compliance with airworthiness regulations.
Provide oversight and engineering expertise to contracted repair agencies performing heavy maintenance and aircraft component repairs.
Develop engineering documents, including Engineering Orders and Engineering Repair Orders, for aircraft systems repairs and modifications.
Coordinate engineering project plans with Materials/Purchasing, Maintenance Planning, and Maintenance Control.
Coordinate with Maintenance, Repair, and Overhaul organizations to ensure approved data forms the basis for aircraft systems repairs and modifications.
Assist with reliability analysis and develop reliability improvement initiatives.
Model customer service standards through personal actions and when providing direction.
Perform other duties as assigned by the Manager of Avionics and Systems Engineering.

Desired Qualifications

FAA Designated Engineering Representative, Organization Designation Authorization Unit Member, Airframe & Powerplant Certificate, Pilot License, FCC License, or EASA B2 Avionics Engineer License.
Knowledge of Airbus and Boeing 737 aircraft systems and avionics.
Familiarity with air conditioning, aircraft software, hydraulics, landing gear, fuel systems, power distribution, and aircraft wiring standards; expertise in at least one of these areas is preferred.
Knowledge and understanding of FAA certification and airworthiness requirements, including major/minor determinations, supplemental type certificates, and operations specifications.

Salary Range: 80000 to 100000 (Currency: USD) (Pay period: per-year-salary)

Summary

The Avionics & System Engineer is responsible for developing engineering solutions to affect repair, in-service modifications, and improvements for aircraft systems such as avionics, landing gears, hydraulics, bleed systems, etc., of the Allegiant Air aircraft fleet. This role provides technical expertise to Line Maintenance via phone, email, and in person, to ensure on-time fleet operations. Key responsibilities include proactively developing solutions for aircraft systems, reliability initiatives, and managing assigned engineering tasks.

Visa Sponsorship Available: No

Minimum Requirements

Combination of Education and Experience will be considered. Must be authorized to work in the US as defined by the Immigration Act of 1986. Must pass a Criminal Background Check.

Education: Bachelor’s Degree

Education Details:

•Bachelor's degree from an accredited university in engineering, engineering sciences, mechanical, aeronautics, or related discipline; OR

•High School Diploma/GED plus FAA Airframe & Powerplant certification and at least five (5) years of airline, Original Equipment Manufacturer (OEM), or military aircraft systems engineering experience; OR

•High School Diploma/GED plus ten (10) years of airline, Original Equipment Manufacturer (OEM), military aircraft systems engineering experience.

Years of Experience:

See above list of education/experience combination.

Valid/Unexpired Passport Book: Yes

•Knowledge of Original Equipment Manufacturer (OEM) Service Bulletins (SB), Airworthiness Directive (AD), Supplemental Type Certificates (STC), FAA Regulation, Components Maintenance Manual (CMM).

•Ability to interpret and apply OEM Wiring and Schematic Diagram Manuals.

•Hands on experience working hydraulics systems, aircraft wiring changes and/or aircraft systems testing procedures such as 14 CFR Part 23 & 91 system testing.

•Strong collaboration skills to work effectively within and outside the Engineering department to meet stakeholder expectations.

•Ability to take ownership and manage projects to completion, including conducting aircraft surveys, identifying, and implementing technical solutions and liaising with Allegiant teams and OEMs.

•Capability to develop engineering standards, troubleshooting instructions, and training materials for repetitive or nonconventional problems to improve operational performance.

•Proficiency with TRAX, Arbortext editing software, and Microsoft Office products.

•Ability and willingness to travel both domestically and internationally to OEM and vendor locations, attend conferences and to support Line Maintenance.

•Must be able to lift 50 lbs.

•Ability and willingness to work on the flight line and maintenance shop environments.

•Ability and willingness to wear Personal Protective Equipment (PPE), including high visibility clothing, ear protection, and safety glasses when required.

Preferred Requirements

•FAA Designated Engineering Representative (DER), ODA Unit Member, Airframe & Powerplant Certificate, Pilot License, FCC License, or EASA B2 – Avionics Engineer License.

•Knowledge of Airbus and Boeing B737 aircraft systems and avionics.

•Familiarity air condition, aircraft software, hydraulics, landing gear, fuel systems, power distribution, and aircraft wiring standards; expertise in at least one of these areas preferred.

•Knowledge of FAA Certification and Airworthiness requirements including MAJOR/MINOR determination, Supplemental Type Certificate (STC) and Ops Specs. Understanding of FAA certification and airworthiness requirements, including major/minor alteration determinations, Supplemental Type Certificates (STC), and Ops Specs.

Job Duties

•Research and provide data to support the development of modifications aimed at improving Allegiant fleet reliability and ensuring compliance with airworthiness regulations.

•Provide oversight and engineering expertise to contracted repair agencies performing heavy maintenance and repairs to aircraft components.

•Develop engineering documents, such as Engineering Orders (EO) and Engineering Repair Orders (ERO), for the accomplishment of aircraft systems repairs and modifications.

•Coordinate engineering project plans with Materials/Purchasing, Maintenance Planning, and Maintenance Control.

•Coordinate with Maintenance, Repair, and Overhaul (MRO) to ensure approved data is used as the basis for aircraft systems repairs and modifications.

•Assist with reliability analysis and the development of reliability improvement initiatives.

•Model Allegiant’s customer service standards through personal actions and when providing direction.

•Perform other duties as assigned by the Manager of Avionics and Systems Engineering.

Physical Requirements

The Physical Demands and Work Environment described here are a representative of those that must be met by a Team Member to successfully perform the essential functions of the role. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the role.

Office/IT - While performing the duties of this job, the Team Member is regularly required to stand, sit, talk, hear, see, reach, stoop, kneel, and use hands and fingers to operate a computer, key board, printer, and phone. May be required to lift, push, pull, or carry up to 50 lbs. May be required to work various shifts/days in a 24 hour situation. Regular attendance is a requirement of the role. Exposure to moderate noise (i.e. business office with computers, phones, printers, and foot traffic), temperature and light fluctuations. Ability to work in a confined area as well as the ability to sit at a computer terminal for an extended period of time. Some travel may be a requirement of the role.

Essential Services Provider

Allegiant as a national air carrier is deemed an essential service provider during declared national and state emergencies. Team Members will be required to report to their assigned trip or work location during national and state emergencies unless prohibited by local, state or federal order.

EEO Statement

We welcome all individuals from varied backgrounds and experiences to apply. Our company values the unique perspectives and talents that each person brings to our team.

Equal Opportunity Employer: Disability/Veteran

For more information, see https://allegiantair.jobs

Full Time Benefits:

Profit Sharing

Medical/Dental/Vision/Life/ Disability Insurance

Medical Travel Reimbursement

Legal, Identity and Pet Insurance

401K with an employer match

Employee Stock Purchase Plan

Employee Assistance Program

Flight Benefits

Paid vacation, holidays, and sick time

Part Time Benefits:

Profit Sharing

Medical Travel Reimbursement

Legal, Identity and Pet Insurance

401K with an employer match

Employee Stock Purchase Plan

Employee Assistance Program

Flight Benefits

Sick time

About the Company

Allegiant Air

Low-cost, all-jet leisure travel carrier

Allegiant Air is a low-cost, all-jet airline based in Las Vegas that serves leisure travelers by offering affordable air travel from smaller cities to vacation destinations. Tickets and bundled travel products such as hotel rooms, rental cars, and entertainment tickets are sold exclusively through Allegiant.com, with revenue coming from ticket sales and the bundles. The company differentiates itself by targeting travelers from smaller markets, using an online-only model, an all-jet fleet, and vacation-package offerings. Its goal is to provide affordable, convenient travel options by expanding its fleet and network and selling bundled experiences online.

Company size: 1,001-5,000
Company stage: IPO
Headquarters: Las Vegas, NV
Founded: 1999

Recently Posted Jobs

Explore more opportunities at Allegiant Air

See more jobs