M

M.C. Dean

Designs and deploys secure mission-critical infrastructure

Mechanical Safety Engineer 2

Environmental Health & SafetyConfirmed live in the last 24 hours
Full-timeMonroe, LA, USANo salary listedIn-person

About the Job

Requirements

  • A bachelor's degree in Mechanical Engineering or a related engineering discipline and at least 2 years of applicable industry experience in mechanical field engineering, maintenance, or commissioning are required; experience in mission-critical facilities is ideal.
  • Exposure to or direct support of mechanical system design activities, including P&IDs, engineering calculations, and specifications, sufficient to read, interpret, and apply the documents in the field.
  • Hands-on experience starting up and commissioning mechanical equipment or systems, including resolving field issues.
  • Experience identifying isolation-related system vulnerabilities, including single points of failure, improper isolation capability, and control logic gaps, through P&ID review, sequence-of-operations validation, and field walkdowns.
  • Understanding of mechanical system sequence of operations and the ability to identify potential mechanical energy sources with possible back-feeds, such as shared headers and standby pumps, and perform absence-of-energy verification.
  • Working knowledge of data center or industrial mechanical systems, including chilled water plants, cooling towers, CRAH/CRAC units, industrial/domestic water, compressed air, and fire protection.
  • Understanding of hazardous mechanical energy sources, including pressure, hydraulic, pneumatic, thermal, gravity, and stored mechanical energy, and the ability to help isolate them and verify a zero-energy state.
  • Familiarity with OSHA 1910.147, Control of Hazardous Energy / Lockout-Tagout.
  • Ability to read and interpret P&IDs, mechanical one-lines/schematics, and construction drawings.
  • Working knowledge of absence-of-energy verification and two-person (pilot-and-copilot) verification practices sufficient to oversee, audit, and enforce them in the field; the role manages and verifies the isolation process rather than personally performing lockout/tagout.
  • Ability to apply general rules to specific problems and produce sensible answers.
  • Ability to understand spoken information, communicate verbally so others understand, identify another person's speech, and read and understand written information.
  • Ability to work with extended screen exposure and sitting, reach by extending hands or arms in any direction, and use finger dexterity to manipulate objects such as a keyboard.

Responsibilities

  • Serve as an on-site resource for mechanical energy isolation involving chilled water, condenser water, industrial/domestic water, compressed air, pneumatic, hydraulic, steam/hot water, and stored mechanical energy, supporting 24x7x365 mission-critical data center operations.
  • Review procedures, job hazard analyses, and permits; ensure safe working conditions; and audit the mechanical isolation program for construction, commissioning, maintenance, and operations activities.
  • Work with construction and commissioning teams to establish safe working conditions for testing and validating the installation, operation, and performance of mechanical systems.
  • Coordinate mechanical isolations and de-isolations with electrical Energy Marshals and other stakeholders when systems are interdependent, including pump and fan motor lockout/tagout and controls interlocks.
  • Oversee and verify that field personnel properly perform absence-of-energy checks and two-person pilot-and-copilot verification before and during mechanical isolation activities.
  • Reinforce field-level accountability so the person physically performing an isolation is responsible for executing it correctly, with verification beyond relying on permits or policy documents.
  • Lead pre-isolation and startup kickoff meetings before first-of-kind startup of mechanical equipment or systems.
  • Apply the Commissioning Plan of Record and commissioning specifications to the energization of mechanical equipment at the jobsite.
  • Advance mechanical safety improvements for the jobsite and future designs.
  • Support implementation of the site-specific Mechanical Hazardous Energy Control Plan.
  • Review Near-Isolated Work scenarios and develop risk assessments to determine safe work practices in partially isolated or energized environments.
  • Maintain field presence during major commissioning or mechanical isolation activities, including first-of-kind startups, hydrostatic/pneumatic pressure testing, and work in turned-over spaces.
  • Coordinate daily Commissioning Team activities related to mechanical systems with the Commissioning Lead.
  • Participate in mechanical lockout/tagout inspections and audits.
  • Coordinate lockout/tagout and outage requests with M.C. Dean Safety, the General Contractor, the Client, and affected vendors and subcontractors.
  • Coordinate mechanical isolation requirements and potential impacts to the jobsite commissioning schedule.
  • Train new and existing employees in mechanical energy isolation processes and procedures.
  • Train individuals performing lockout/tagout by mechanical equipment type and verify their competency, contributing to an ongoing pool of qualified and authorized personnel.
  • Attend and participate in daily commissioning meetings and weekly all-hands meetings for the jobsite.
  • Develop, review, and approve mechanical lockout/tagout permits.
  • Lead and attend M.C. Dean operational risk management safety briefs with the Commissioning Team and vendors.
  • Ensure personal protective equipment, tools, and equipment are suitable for mechanical isolation work.
  • Assist the site's Mechanical Energy Marshal in maintaining hazardous energy control documentation, isolation procedures, and mechanical equipment lockout/tagout permit records.
  • Help administer the mechanical lockout/tagout permitting process by issuing, tracking, and filing permits, and provide field feedback for program improvement.

Desired Qualifications

  • Experience with piping and fluid system analysis tools such as AFT or equivalent.
  • Exposure to mechanical infrastructure audits or resiliency/availability assessments.
  • OSHA 10/30 certification.
  • Prior experience operating under two-person or independent-verification protocols for energy isolation.
  • Experience coordinating with electrical Energy Marshals or electrical safety programs.

About the Company

M.C. Dean

Designs and deploys secure mission-critical infrastructure

M.C. Dean designs, builds, operates, and maintains integrated cyber-physical systems for mission-critical facilities, secure environments, and large enterprises. Its work spans electrical power, security, telecommunications, life safety, automation and controls, audio-visual, and IT systems, all coordinated through management platforms that support long-term operation and sustainability. The company works end-to-end: it engineers solutions, installs them, and then runs and maintains them to ensure continuous, secure, and resilient performance. What sets it apart is its ability to provide comprehensive, turnkey technology and infrastructure services for critical environments—combining physical systems with digital management to create secure, automated facilities. The goal is to deliver automated, secure, and resilient power and technology systems and the platforms needed to manage them over the long term.

Company size
1,001-5,000
Company stage
Not listed
Total funding
Not listed
Headquarters
Tysons, VA
Founded
1949

Recently Posted Jobs

Explore more opportunities at M.C. Dean

See more jobs